Resources
Products
Single Ply Commercial Roofing
Bituminous Commercial Roofing
SBS Commercial Roofing Membranes
With over three decades of experience producing modified bitumen, we understand the science of formulating systems that last.
Our SBS is a premium modified bitumen engineered specifically for elasticity. It is made to withstand even the harshest environments.
SBS is the most customizable of our low-slow commercial roofing products with glass, polyester and composite reinforcements. It can be installed with the widest variety of application methods including cold applied, heat weld, self-adhered, mechanically fastened, and hot applied applications.
Membranes
DynaBase


Meets the requirements of ASTM D 6163, Type I, Grade S
DynaBase is used as a fiber glass-reinforced base or ply sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics, contributing to better aesthetics.
Surfacing: Fine mineral parting agent on both sides of the sheet.

DynaBase HW


Meets the requirements of ASTM D 6163, Type 1, Grade S
DynaBase HW is used as a fiber glass-reinforced base or ply sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Surfacing: Fine mineral parting agent on the top side of the sheet. A polyolefin burn-off film on the bottom side enables the product to be applied using heat welding techniques.

DynaBase PR


Meets the requirements of ASTM D 6164, Type 1, Grade S
DynaBase PR is used as a polyester-reinforced base or ply sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester-Reinforcement Mat: Polyester mat with bi-directional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Surfacing: Fine mineral parting agent on both sides.

DynaClad


Meets or exceeds the criteria for ASTM D 6298
DynaClad is used as a fiber glass-reinforced cap or flashing sheet in a variety of multi-ply roofing systems.
Aluminum Foil Surface: Provides high reflectivity, reducing heat load on the roof membrane and potentially lowering air conditioning energy costs.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
DynaClad Copper


Meets or exceeds the criteria for ASTM D 6298
DynaClad Copper is used as a fiber glass-reinforced cap or flashing sheet in a variety of multi-ply roofing systems.
Copper Foil Surface: Provides high reflectivity, reducing heat load on the roof membrane and potentially lowering air conditioning energy costs.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.

DynaFast 180 HW


Meets the requirements of ASTM D 6164, Type I, Grade S
DynaFast 180 HW is a heat weldable base or ply sheet for use in mechanically fastened systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester-Reinforced Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
DynaFast 180 S


Meets the requirements of ASTM D 6164, Type I, Grade S
DynaFast 180 S is a base or ply sheet for use in mechanically fastened systems.
Fine Mineral Parting Agent: A fine material parting agent is applied to both sides of the product. This product does not have a surface finish and must be used in constructions that will provide protection from UV (ultraviolet light) and the elements.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester-Reinforced Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
DynaFast 250 HW


Meets the requirements of ASTM D 6164, Type II, Grade S
DynaFast 250 HW is a heat-weldable base or ply sheet for use in mechanically fastened systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness, and puncture resistance and can accommodate stresses created by typical roof top expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
DynaFlex


Meets or exceeds the criteria for ASTM D 6221, Type I
DynaFlex is used as a composite-reinforced cap sheet membrane in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
DynaFlex CR G


Meets the requirements of ASTM D 6221, Type I, Grade G
DynaFlex CR G is used as a composite-reinforced cool roof cap sheet membrane in a variety of multi-ply roofing systems.
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The thicker JM SBS coating provides more waterproofing value.
Fiber Glass/Polyester Reinforcement Mat: The inorganic fiber glass reinforcement, in conjunction with the polyester, provides stability, toughness and puncture resistance to the product, and resists moisture absorption.

Brochures
DynaGlas


Meets the requirements of ASTM D 6163, Type I, Grade G
DynaGlas is used as a fiber glass-reinforced mineral-surfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.

DynaGlas 30 FR


Meets the requirements of ASTM D 6163, Type 1, Grade G
DynaGlas 30 FR is used as a fiber glass-reinforced mineral-surfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
DynaGlas FR


Meets the requirements of ASTM D 6163, Type 1, Grade G
DynaGlas FR is used as a fiber glass-reinforced mineral-surfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
DynaGlas FR CR G


Meets the requirements of ASTM D 6163, Type I, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics, contributing to better aesthetics.

Brochures
DynaGrip Base P/SA


Meets the requirements of ASTM D 4601
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement.
Polyolefin Burn-Off Film with a Self-Adhering Modified Bitumen: The top side polyolefin burn-off film promotes ease of heat welding for installation of a heat-welded cap sheet such as DynaWeld Cap 250. The bottom side has a self-adhering surface with an easy-to-peel plastic film sheet that allows for installation without the need of hot asphalt or heat welding.
DynaGrip Base PR P/SA


High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Polyester-Reinforcement Mat: Polyester mat with bi-directional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film with a Self-Adhering Modified Bitumen: The top side polyolefin burn-off film promotes ease of heat welding for installation of a heat-welded cap sheet such as DynaWeld Cap 250. The bottom side has a self-adhering surface with an easy-to-peel plastic film sheet that allows for installation without the need of hot asphalt or heat welding.

Brochures
DynaGrip Base PR SA/SA


High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Polyester-Reinforcement Mat: Polyester mat with bi-directional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Two-Sided Self-Adhering Modified Bitumen: The product’s self-adhering feature with an easy-to-peel plastic film on both sides of the sheet allows for installation without the need of hot asphalt or heat welding.

Brochures
DynaGrip Base PR SD/SA


Sand Top Surface: Allows for installation of a cap sheet with hot asphalt, an approved cold adhesive, or by using heat welding techniques.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Polyester-Reinforcement Mat: Polyester mat with bi-directional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Self Adhering Modified Bitumen: The product’s self-adhering feature with an easy-to-peel plastic film on the bottom of the sheet allows for installation without the need of hot asphalt or heat-welding.

Brochures
DynaGrip Base SA/SA


Meets the requirements of ASTM D 4601
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement.
Two-Sided Self-Adhering Modified Bitumen: The product’s self-adhering feature with an easy-to-peel plastic film on both sides of the sheet allows for installation without the need of hot asphalt or heat welding.
DynaGrip Base SD/SA


Meets the requirements of ASTM D 4601
Sand Top Surface: Allows for installation of a cap sheet with hot asphalt, an approved cold adhesive, or by using heat welding techniques.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement.
Self Adhering Modified Bitumen: The product’s self-adhering feature with an easy-to-peel plastic film on the bottom of the sheet allows for installation without the need of hot asphalt or heat-welding.
DynaGrip Cap

Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement.
Self Adhering Modified Bitumen: The product’s self-adhering feature with an easy-to-peel plastic film on the bottom of the sheet allows for installation without the need of hot asphalt or heat-welding.
DynaGrip Cap PR


Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Polyester-Reinforcement Mat: Polyester mat with bi-directional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Self Adhering Modified Bitumen: The product’s self-adhering feature with an easy-to-peel plastic film on the bottom of the sheet allows for installation without the need of hot asphalt or heat-welding.

Brochures
DynaKap FR T1


Meets the requirements of ASTM D 6162, Type 1, Grade G
DynaKap FR T1 is used as a premium fiber glass/polyesterreinforced mineral-surfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion. Granules are available in White or Black.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
DynaKap FR T1 CR G


Meets the requirements of ASTM D 6162, Type I, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Fiber Glass/Polyester Reinforcement Mat: Provides stability, toughness and puncture resistance to the product and resists moisture absorption. The reinforcement also provides high tensile strength and affords better natural resistance to the other factors which affect roof performance.
Color: Bright White only
Brochures
DynaKap FR T1 HW


Meets the requirements of ASTM D 6162, Type I, Grade G
DynaKap FR T1 HW is used as a premium fiber glass/polyester-reinforced mineral-surfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass. Polyolefin
Burn-Off Film: Promotes ease of heat welding.
Colors: White or Black.

DynaKap FR T1 HW CR G

Meets the requirements of ASTM D 6162, Type I, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Fiber Glass / Polyester Reinforcement Mat: Provides stability, toughness and puncture resistance to the product and resists moisture absorption. The reinforcement also provides high tensile strength and affords better natural resistance to the other factors which affect roof performance.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Color: Bright White only
Brochures
DynaKap T1


Meets the requirements of ASTM D 6162, Type I, Grade G
DynaKap T1 is used as a fiber glass/polyester-reinforced mineralsurfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion. Granules are available in White or Black.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Colors: White or Black.
DynaLastic 180


Meets the requirements of ASTM D 6164, Type I, Grade G
DynaLastic 180 is used as a polyester-reinforced mineral-surfaced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
DynaLastic 180 FR


Meets the requirements of ASTM D 6164, Type I, Grade G
DynaLastic 180 FR is used as a polyester-reinforced mineral-surfaced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Polyester-Reinforced Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Colors: White or Black.
DynaLastic 180 FR CR G

Meets the requirements of ASTM D 6164, Type I, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Polyester Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Color: Bright White only
Brochures
DynaLastic 180 S


Meets the requirements of ASTM D 6164, Type I, Grade S
DynaLastic 180 S is used as a polyester-reinforced base or ply sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Surfacing: A fine material parting agent is applied to both sides of the product.
DynaLastic 250


Meets the requirements of ASTM D 6164, Type II, Grade G
DynaLastic 250 is used as a premium polyester-reinforced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness, and puncture resistance and can accommodate stresses created by typical roof top expansion and contraction forces.

DynaLastic 250 .86 Sq


Meets the requirements of ASTM D 6164, Type II, Grade G
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness, and puncture resistance and can accommodate stresses created by typical roof top expansion and contraction forces.

DynaLastic 250 CR G .86 Sq


Meets the requirements of ASTM D 6164, Type II, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
Elastomeric SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation, and lends elasticity and flexibility to the sheet.
Heavy Duty Polyester Mat Reinforcement: A tough, nonwoven polyester mat provides excellent tensile strength, toughness and puncture resistance, and can accommodate stresses created by typical rooftop expansion and contraction forces.

Brochures
DynaLastic 250 FR


Meets the requirements of ASTM D 6164, Type II, Grade G
DynaLastic 250 FR is used as a premium polyester-reinforced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness, and puncture resistance and can accommodate stresses created by typical roof top expansion and contraction forces.
DynaLastic 250 FR CR G


Meets the requirements of ASTM D 6164, Type II, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
Elastomeric SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation, and lends elasticity and flexibility to the sheet and contains fire-retardant additives.
Heavy Duty Polyester Mat Reinforcement: A tough, nonwoven polyester mat provides excellent tensile strength, toughness and puncture resistance, and can accommodate stresses created by typical rooftop expansion and contraction forces.
Color: Bright White only
Brochures
DynaLastic 250 S


Meets the requirements of ASTM D 6164, Type II, Grade S
DynaLastic 250 S is used as a polyester-reinforced base or ply sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Heavy Duty Polyester-Reinforcement Mat: Provides bidirectional glass-scrim reinforcement and offers robust tear strength and puncture resistance, allowing for high wind performance and excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Surfacing: A fine material parting agent is applied to both sides of the product.
DynaMax FR


Meets the requirements of ASTM D 6162, Type III, Grade G
DynaMax FR is used as a premium fiber glass/ polyester-reinforced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
DynaMax FR CR G


Meets the requirements of ASTM D 6162, Type III, Grade G
DynaMax FR CR G is used as a fiber glass/polyester-reinforced cool roof cap sheet in a variety of multi-ply roofing systems.
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Brochures
DynaMax FR HW


Meets the requirements of ASTM D 6162, Type III, Grade G
DynaMax FR HW is used as a premium fiber glass/ polyester-reinforced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
DynaMax FR HW CR G


Meets the requirements of ASTM D 6162, Type III, Grade G
DynaMax FR HW CR G is used as a premium fiber glass/ polyester-reinforced cool roof cap sheet in a variety of multi-ply roofing systems.
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Brochures
DynaMax FR Plus


Meets the requirements of ASTM D 6162, Type III, Grade G
DynaMax FR Plus is used as a premium fiber glass/ polyester-reinforced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
DynaMax FR Plus Smooth


Meets the requirements of ASTM D 6162, Type III, Grade S
DynaMax FR Plus Smooth is used as a premium fiber glass/ polyester-reinforced base sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: Fine mineral parting agent on both sides of the sheet.
DynaMax FR S HW


Meets the requirements of ASTM D 6162, Type III, Grade S
DynaMax FR S HW is used as a premium fiber glass/ polyester-reinforced base sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: Fine mineral parting agent on the top side of the sheet. A polyolefin burn-off film on the bottom side enables the product to be applied using heat welding techniques.
DynaMax FR Smooth


Meets the requirements of ASTM D 6162, Type III, Grade S
DynaMax FR Smooth is used as a premium fiber glass/ polyester-reinforced modified bitumen base sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: A fine material parting agent is applied to both sides of the product.
DynaMax Smooth


Meets the requirements of ASTM D 6162, Type III, Grade S
DynaMax Smooth is used as a premium fiber glass/ polyester-reinforced modified bitumen base, ply, or cap sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: A fine material parting agent is applied to both sides of the product.
DynaPly T1


Material meets the requirements of ASTM D 6162, Type I, Grade S
DynaPly T1 is used as a premium fiber glass/polyester-reinforced base or ply sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Non-Blocking Surface: Nonblocking surface does not have a surface finish and must be used in constructions that will provide protection from UV (ultraviolet light) and the elements.
DynaTred Walkway

Preformed, skid-resistant roof protection pads consisting of modified asphalt, reinforcements and fillers with a ceramic granule surface on both sides. They are durable, resilient and maintenance free.
DynaTred and DynaTred Plus can be installed over built-up and modified bitumen roofing systems to provide an integral, skidresistant walkway for demanding service access needs.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the modified asphalt sheet. The ceramic coating promotes excellent long-term adhesion.
Easy Installation: Can be easily cut with a heavy-duty utility knife or circular saw with a carbide-tipped blade.
Colors: Available in either Black/White or White/White.
DynaWeld 180 S


Meets the requirements of ASTM D 6164, Type I, Grade S
DynaWeld 180 S is used as a polyester-reinforced base or ply sheet in a variety of multi-ply roofing systems.
Fine Mineral Parting Agent: Nonblocking surface for use as a base sheet or ply sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Surfacing: Fine mineral parting agent on the top side of the sheet. A polyolefin burn-off film on the bottom side enables the product to be applied using heat welding techniques.
DynaWeld Base


Meets the requirements of ASTM D 6163, Type I, Grade S
DynaWeld Base is used as a fiber glass-reinforced base or ply sheet in a variety of multi-ply roofing systems.
Fine Mineral Parting Agent: Nonblocking surface for use as a base sheet or ply sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
DynaWeld Cap


Meets the requirements of ASTM D 6163, Type I, Grade G
DynaWeld Cap is used as a fiber glass-reinforced mineralsurfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Polyolefin Burn-Off Film: Promotes ease of heat welding.

DynaWeld Cap 180


Meets the requirements of ASTM D 6164, Type I, Grade G
DynaWeld Cap 180 is used as a polyester-reinforced mineralsurfaced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester-Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Colors: White, Black, Tan (Black and Tan may require extended lead times).
DynaWeld Cap 180 FR


Meets the requirements of ASTM D 6164, Type I, Grade G
DynaWeld Cap 180 FR is used as a polyester-reinforced mineralsurfaced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Polyester Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Colors: White, Black and Tan (Black and Tan may require extended lead times.)
DynaWeld Cap 180 FR CR G


Meets the requirements of ASTM D 6164, Type I, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Polyester Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Color: Bright White only
Brochures
DynaWeld Cap 250


Meets the requirements of ASTM D 6164, Type II, Grade G
DynaWeld Cap 250 is used as a premium polyester-reinforced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
Fiber Glass/Polyester Reinforcement Mat: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness, and puncture resistance and can accommodate stresses created by typical roof top expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Colors: White, Black and Tan (Black and Tan may require extended lead times).
DynaWeld Cap 250 .86 Sq


Meets the requirements of ASTM D 6164, Type II, Grade G
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion. Granules are available in White, Black and Tan (Black and Tan may require extended lead times).
Fiber Glass/Polyester Reinforcement Mat: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness, and puncture resistance and can accommodate stresses created by typical roof top expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.

DynaWeld Cap 250 CR G .86 Sq


Meets the requirements of ASTM D 6164, Type II, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The thicker JM SBS coating provides more waterproofing value.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness and puncture resistance, and it can accommodate stresses created by typical rooftop expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.

Brochures
DynaWeld Cap 250 FR


Meets the requirements of ASTM D 6164, Type II, Grade G
DynaWeld Cap 250 FR is used as a premium polyester-reinforced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness and puncture resistance, and it can accommodate stresses created by typical rooftop expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Colors: White, Black and Tan (Black and Tan may require extended lead times).
DynaWeld Cap 250 FR CR G


Meets the requirements of ASTM D 6164, Type II, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness and puncture resistance, and it can accommodate stresses created by typical rooftop expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Color: Bright White only
Brochures
DynaWeld Cap FR


Meets the requirements of ASTM D 6163, Type I, Grade G
DynaWeld Cap FR is used as a fiber glass-reinforced mineralsurfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Colors: White, Black and Tan (Black and Tan may require extended lead times.)
DynaWeld Cap FR CR G


Meets the requirements of ASTM D 6163, Type I, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics, contributing to better aesthetics.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Color: Bright White only
Brochures
DynaWeld Cap FR XT CR G


Meets the requirements of ASTM D 6163, Type II, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Heavy Weight Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory, less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.

Brochures
JM SBS HP Base Membranes - Canada


JM SBS High Performance (HP) base membranes use a composite reinforcement, a simplified product offering with glass and polyester reinforced mats offer higher strength and improved stability for ultimate performance. These products meet CSA 123.23, Type C, Grade 3 for Canada.
JM SBS HP Cap Membranes - Canada


JM SBS High Performance (HP) cap membranes use a composite reinforcement, a simplified product offering with glass and polyester reinforced mats offer higher strength and improved stability for ultimate performance. These products meet CSA 123.23, Type C, Grade 1 for Canada.
JM BaseGrip SD/SA


Meets the requirements of ASTM D 4601, Type II, and D 1970
JM BaseGrip™ SD/SA is designed for use in roofing systems where two or more plies of modified bitumen are desired. It may be used as the base ply when installed over an approved substrate.
Sand Top Surface: With a self adhering side lap that aids with faster installation and ease of use. Also allows for installation of a torchable cap sheet, hot asphalt, or an approved cold adhesive. Is ideal with heat welding.
SBS (Styrene-Butadiene-Styrene) Synthetic Rubber and High Quality Asphalt Blend: Brings elasticity and flexibility to the sheet; lays flat virtually eliminating wrinkles resulting in fast, efficient applications. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction strains experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability, tensile strength, puncture resistance, and withstands differential movement.
Self Adhering Modified Bitumen: The product’s self-adhering feature with an easy-to-peel plastic film on the bottom of the sheet and top side lap aids with faster installation without the need of hot asphalt or heat welding.
JM CleanBond Base Sheet


Meets the requirements of ASTM D 4601
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet, and includes fire-retardant additives.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement.
Two-Sided Self-Adhering Modified Bitumen: The product’s self-adhering feature with an easy-to-peel plastic film on both sides of the sheet allows for installation without the need of hot asphalt or heat-welding.
Installation Guides
JM CleanBond Cap


Meets the requirements of ASTM D 6163, Type I, Grade G
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet, and includes fire-retardant additives.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement.
Self-Adhering Modified Bitumen: The product’s self-adhering feature with an easy-to-peel plastic film on the bottom side of the sheet allows for installation without the need of hot asphalt or heat-welding.
Installation Guides
JM CleanBond Polyester Base Flashing


High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet, and includes fire-retardant additives.
Polyester Reinforcement Mat: Provides excellent tensile strength, tear resistance and flexibility.
Two-Sided Self-Adhering Modified Bitumen: The product’s self-adhering feature with an easy-to-peel plastic film on both sides of the sheet allows for installation without the need of hot asphalt.
Installation Guides
JM CleanBond Polyester Cap Flashing


Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet. Designed for the sharp angle changes and turns found in flashing areas.
Polyester Reinforcement Mat: The 170 g/m2 polyester mat provides excellent tensile strength, tear resistance and flexibility.
Self-Adhering Modified Bitumen: The product’s self-adhering feature with an easy-to-peel plastic film on the bottom side of the sheet allows for installation without the need of hot asphalt.
Installation Guides
Ventsulation


Material meets the requirements of ASTM D 4897, Type II
Ventsulation Felt may be used as a base sheet for any built up roofing or modified bitumen roofing system to be installed over a substrate that potentially contains moisture.
1" Embossed Waffle Pattern Grid Channels: Promotes moisture vapor venting. Helps prevent blistering of asphalt-based roofs when installed over potential moisture-containing substrates such as: Re-covers over existing roof membranes, lightweight insulating fill or gypsum decks.
Fiber Glass Reinforcement Mat: Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic base sheets. Provides a solid dimensionally stable substrate for other roofing membrane components.
Surfacing: Coarse minerals on one side.

JM Vapor Barrier SA


Tri-laminate woven polyethylene, nonslip, UV-protected top surface: Provides temporary weather protection for 90 days. Provides high tensile strength and puncture resistance.
Self-sealing, high-quality SBS rubber and asphalt blend: Provides low air and vapor permeability.
Silicone release film: Allows for ease of self-adhering installation.
Brochures
JM Vapor Barrier SAR


Tri-laminate woven polyethylene, nonslip, UV-protected top surface: Provides temporary weather protection for 90 days. Provides high tensile strength and puncture resistance.
Self-adhering modified bitumen: Self-sealing, high-quality SBS rubber and asphalt blend: provides low air and vapor permeability.
Split-back silicone release film: Easy-to-peel release film sheet that allows for ease of self-adhering installation.
