Resources
Products
JM Corbond IV
JM Corbond IV
JM Corbond® IV closed-cell spray polyurethane foam (SPF) is a next generation HFO blown, two-component, Class 1 rated, medium-density, SPF insulation system. JM Corbond IV is designed to insulate commercial, residential, and industrial buildings. The HFO technology allows JM Corbond IV to be produced with a low Global Warming Potential (GWP) and with an Ozone Depletion Potential (ODP) of zero. Its high yield, superior thermal and moisture performance, and exceptional sprayability and adhesion make it an ideal choice for high-performing energy efficient buildings.
| Flame Spread | ASTM E84 | ≤ 25 |
| Smoke Development | ASTM E84 | ≤ 450 |
| Fungi Resistance | ASTM C1388 | Pass |
| Dimensional Stability | ASTM D2126 | 12% change in volume |
| Core Density | ASTM D1622 | 2.0 lb/ft3 |
| Closed-Cell Content | ASTM D6226 | > 90% |
| Compressive Strength (1") | ASTM D1621 | 36 psi |
| Water Absorption | ASTM D2842 | 0.88% |
| Water Vapor Transmission | ASTM E96 | 0.61 perm at 1.5", 1.1 perm at 1" |
| Air Permeance | ASTM E2178-03 | 0.00055 (L/s)/m at 75 Pa |
| Sound Transmission | ASTM E90-90, ASTM E413-87 | 36 (STC) |
DATA SHEET
SDS
JM Corbond SDS - A
JM Corbond SDS - A (ES)
JM Corbond IV Closed-cell SDS - B
JM Corbond IV Closed-cell SDS - B (ES)
LITERATURE
Product Selector Guide
JM Corbond IV Guide
TechConnect Sell Sheet
Building Envelope Solutions
INSTALLATION INSTRUCTIONS
JM Corbond IV Installation Guide
SPF Processing Parameters
SPF Change-over Procedure
SPF Change-over Procedure (ES)
SPF Safety Warning Sign
SPF Health and Safety Sheet
Corbond Daily Work Log
EVALUATION REPORTS
Environmental Product Declaration Spray Polyurethane Foam Insulation (HFO) Report
JM Corbond IV IAPMO Report (ER 0146)
EPD for Spray Polyurethane Foam Insulation Closed Cell Using Hydrofluoroolefins (CCSPF, HFO)