Board and Blanket Insulation

Johns Manville equipment board and blanket insulation products provide solutions you can count on. These products deliver excellent thermal and acoustical performance and satisfy a wide range of application and design requirements. Our fiber glass boards and flexible fiber glass blankets are designed for use on process equipment, ducts and vessels. Contractors rely on JM’s board and blanket insulation products for superior handling strength and ease of fabrication for improved productivity. JM’s proprietary manufacturing process ensures optimal consistency during production, which results in a product quality you can trust.

Fiberglass equipment insulation for industrial applications (service temp: 850°F)

Johns Manville 1000 Series Spin-Glas® is an equipment insulation designed to meet the demanding requirements of industrial applications. The controlled manufacturing process and unique binder results in improved mechanical properties and higher application temperatures. Typical applications include furnaces, boilers, heated vessels, ducts, tanks and other heating equipment. 

Density (pcf): 3.0
Service Temp (Nominal): 850° F
Thermal Conductivity: 0.23
Recycle Content: 28%

1000_SeriesSpinGLas_490x322
Available Documents

Fiberglass equipment and duct insulation (service temp: 450°F)

Johns Manville 800 Series Spin-Glas® equipment and external duct insulation provides a broad range of solutions to meet your unique application needs. The breadth and depth of our product availability includes plain, FSK, AP (ASJ), or Ultra (poly-top) faced board, where the facing acts as a vapor retarder. You can be assured you are getting the same superior performance from the facing as the insulation because we manufacture both to the highest quality standards. 800 Series Spin-Glas board is easily fabricated for an excellent finished appearance on duct and equipment systems.

Density (pcf): 1.5 - 6.0
Service Temp (Nominal): 450° F
Thermal Conductivity (k): 0.22-0.24
Recycle Content: 28%

800SeriesSpinGlas_700x476
Johns Manville 800 Series Spin-Glas® Ultra

Johns Manville 800 Series Spin-Glas® Ultra

Johns Manville 800 Series Spin-Glas® Ultra

Johns Manville 800 Series Spin-Glas® Ultra

Available Documents

Spin-Glas® Ultra Polypropylene Scrim Reinforced Tape is designed to provide a vapor barrier seal on JM’s 800 Series Spin-Glas Ultra fiberglass board insulation.

Spin-Glas® Ultra Polypropylene Scrim Reinforced Tape is designed to provide a vapor barrier seal on JM’s 800 Series Spin-Glas Ultra fiberglass board insulation. The tape has the same polypropylene coated scrim reinforced metalized polyester facing as the 800 Series Spin-Glas Ultra fiberglass board insulation. Spin-Glas Ultra Tape is tear-resistant and offers a super high-tack, acrylic adhesive that bonds tightly to surfaces. The tape can be used on applications that operate within a wide temperature range: 20°F – 130°F/-7°C -54°C.

060721_JM_Spin-Glas_Tape_Label-GradBckgrnd
Johns Manville 800 Series Spin-Glas® Ultra

Johns Manville 800 Series Spin-Glas® Ultra

Johns Manville 800 Series Spin-Glas® Ultra

Johns Manville 800 Series Spin-Glas® Ultra

Available Documents

Fiberglass equipment insulation designed for precipitators, baghouses, scrubbers, ducts, & breechings in power-generation plants (service temp: 850°F)

Johns Manville Precipitator Spin-Glas® is a semi-rigid, lightweight industrial equipment insulation specifically designed for insulating precipitators, baghouses, scrubbers, ducts and breechings in power-generation plants. It can also be used for insulating boilers, heaters, ovens and other industrial equipment. Precipitator Spin-Glas is available in a variety of standard and custom sizes and is an excellent choice for applications that do not require higher densities.

Density (pcf): 2.4
Service Tempe (Nominal): 850° F
Thermal Conductivity (k): 0.24
Recycle Content: 28%

PrecipitatorSpinGlas_490x322
Available Documents

Formaldehyde-free™ fiberglass, blanket-type duct wrap with a white PSK facing. (Service temp: 250°F)

Microlite® White PSK Formaldehyde-free™ duct wrap offers superior thermal performance and condensation control in a lightweight, blanket-type insulation with a white PSK facing. It is recommended for HVAC system exteriors or surfaces where design parameters prohibit the use of liner or board. Installing contractors prefer Microlite's binder for many reasons, including improved handling, easier cutting and less dust. Our manufacturing process ensures consistency during production, which results in reliable product quality. Matching White PSK seaming tape is available, click on the accessories tab to learn more.

Permeance: 0.02
R-value: 4.2
Recycle Content: 24%
Greenguard: Gold

Microlite_PSK-white_700x467

The Microlite® PSK Duct Wrap Seaming Tape is designed to provide a vapor barrier seal on JM’s PSK-faced Microlite duct insulations. The tape is offered in white or black to match the two color offerings (white and black) of our PSK-faced Microlite duct insulations. Microlite seaming tape is tear-resistant and offers a super high-tack, acrylic adhesive that bonds tightly to surfaces. The tape can be used on applications that operate within a wide temperature range: -20°F – 260°F/-29°C -126°C.

PSK_Tape_700x467

Duct Insulation Knives are designed to smoothly cut fiberglass insulation. The sharp blade cleanly slices through the fiberglass and facing without snagging the material. The wooden handle is easy to hold and curved to fit the hand. This is the preferred duct knife by experts throughout the industry, as well as JM’s leading team of plant and field professionals.

Duct knives are shipped in master cartons. Each master carton consists of 10 boxes of 10 knives each. The minimum order quantity is one master carton (100 knives total).

When using or handling JM’s Duct Insulation Knives, be sure to use the appropriate PPE and keep your hands clear of the blade. Duct Insulation Knives should be used for their intended purposes only.

Duct_Knife_700xn
Available Documents

Lightweight fiberglass blanket for industrial applications (service temp: 1000°F)

Johns Manville’s High Temperature Blanket (HTB) 26 Spin-Glas® is a lightweight insulation blanket designed to provide high insulating efficiency for industrial applications. HTB 26 Spin-Glas is an excellent choice for applications requiring a low density blanket. In addition, its high tensile strength provides resistance to damage during installation and it is manufactured with a Formaldehyde-Free™ binder. This flexible blanket performs well for heated, irregular surfaces or in the manufacturing of removable insulating pads and covers. 

Density (pcf): 1.0
Service Temp (Nominal): 1000° F
Thermal Conductivity (k): 0.26
Recycle Content: 28%

HTB 26 Spin-Glas
Available Documents

Formaldehyde-free™ fiberglass, blanket-type duct wrap with a black-coated PSK facing. (Service temp: 250°F)

Microlite® Black PSK Formaldehyde-free™ duct wrap offers excellent thermal control with the added benefit of a black-coated PSK facing that is ideal for aesthetic applications. It is recommended for exposed applications inside the building envelope, such as open ceilings with exposed duct work. Our manufacturing process ensures insulation consistency during production, which results in reliable product quality. Microlite Black PSK meets the UL requirements for 25/50 flame spread/smoke developed. Matching Black PSK seaming tape is available, click on the accessories tab to learn more.

 

Permeance: 0.02
R-value: 4.2
Recycle Content: 24%
Greenguard: Gold

Microlite_Black_PSK_700x467

The Microlite® PSK Duct Wrap Seaming Tape is designed to provide a vapor barrier seal on JM’s PSK-faced Microlite duct insulations. The tape is offered in white or black to match the two color offerings (white and black) of our PSK-faced Microlite duct insulations. Microlite seaming tape is tear-resistant and offers a super high-tack, acrylic adhesive that bonds tightly to surfaces. The tape can be used on applications that operate within a wide temperature range: -20°F – 260°F/-29°C -126°C.

PSK_Tape_700x467

Duct Insulation Knives are designed to smoothly cut fiberglass insulation. The sharp blade cleanly slices through the fiberglass and facing without snagging the material. The wooden handle is easy to hold and curved to fit the hand. This is the preferred duct knife by experts throughout the industry, as well as JM’s leading team of plant and field professionals.

Duct knives are shipped in master cartons. Each master carton consists of 10 boxes of 10 knives each. The minimum order quantity is one master carton (100 knives total).

When using or handling JM’s Duct Insulation Knives, be sure to use the appropriate PPE and keep your hands clear of the blade. Duct Insulation Knives should be used for their intended purposes only.

Duct_Knife_700xn
Available Documents

Formaldehyde-free™ fiberglass, blanket-type duct wrap with FSK facing. (Service temp: 250°F)

Microlite® FSK Formaldehyde-free™ duct wrap offers superior thermal performance and condensation control in a lightweight, blanket-type insulation with an FSK facing. It is recommended for HVAC system exteriors or surfaces where design parameters prohibit the use of liner or board. Installing contractors prefer Microlite's binder for many reasons, including improved handling, easier cutting and less dust. Our manufacturing process ensures consistency during production, which results in reliable product quality.

R Value: 4.2 (1.5")
Permeance Rating (Facing): 0.02
Recycle Content: 24%
Greenguard: Gold

Microlite_FSK_White_700x467
Available Documents

Polyisocyanurate foam board designed to insulate rooftop ducts and HVAC equipment

The XSPECT® ISOfoam APF board is a closed-cell polyisocyanurate foam core bonded to a foil facer on both sides. It is a highly versatile insulation that can be used in a variety of mechanical and OEM applications, including rooftop ducts, appliances, HVAC equipment, refrigerated transportation, storage vessels, and railcars.

XSPECT ISOfoam APF board offers one of the highest R-values of any rigid insulation available, making it ideal for both hot and cold applications. The foil facer on the insulation operates as an excellent vapor-retarder, working in tandem with the closed cell foam to contribute to a tightly sealed system. Additionally, the lightweight foam makes it easy to fabricate and install.

R-Value: R-2.7 - R-26
Thickness: 1" - 4"
Sizes: 48"x96"
Facings: Silver/Opaque

Xspect_FoamBoard_490x322
Available Documents

Fiberglass, large-diameter pipe and tank wrap for industrial applications: (service temp: 850°F)

Johns Manville Micro-Flex® is a large diameter pipe and tank wrap that provides an alternative solution to pre-formed insulation. Our manufacturing process yields a fiber orientation that enhances both the compressive strength and thermal performance of the final product when compared to conventional pipe and tank insulation. Micro-Flex rolls can be cut to size on-the-job and are available with FSK or AP vapor retarder facing. It provides a single solution to a variety of field applications for the contractor and distributer. 

Density (pcf): 2.5
Service Temp (Nominal): 850° F
Thermal Conductivity (k): 0.23
Recycle Content: 26%

MicroFlex_490x322
Available Documents