DynaWeld 250 S

Product Descriptive Name: Heavy-Duty Polyester-Reinforced SBS Base, Ply, or Flashing Sheet
Product Short Description: DynaWeld 250 S is used as a polyester-reinforced base or ply sheet in a variety of multi-ply roofing systems.

Product Details

DynaWeld 250 S

Product Long Description

Features

DynaWeld 250 S

Features

Meets the requirements of ASTM D 6164, Type II, Grade S

Fine Mineral Parting Agent: Nonblocking surface for use as a base sheet or ply sheet.

High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.

Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness and puncture resistance, and it can accommodate stresses created by typical rooftop expansion and contraction forces.

Polyolefin Burn-Off Film: Promotes ease of heat welding.

Documents

SBS Installation and Details

When it comes to design, we've got the tools to get you from the desk to the roof. Here you will find all of the SBS specifications, 3-part specs, details and installation guides. If you have any questions when it comes to installation, please contact our Specifier Services Group for design and your local technical representative for the field.

Flashing Details
Fastening Patterns
Assembly Plates
Specifications
Installation Guides


EDGE	CAD	PDF
BIT-4 (GTR) Roof Edge Gutter	DWG	PDF
BIT-4 Roof Edge with Presto Tite	DWG	PDF


EXPANSION, TIE-IN AND TRANSITION*	CAD	PDF
BIT-1 (NLB) Base Flashing for Non Load Brng Wall-Curb to Wall EJ	DWG	PDF
BIT- 5 Base Flashing for Non Load Bearing Wall & Metal EJ	DWG	PDF
BIT- 7 Curb Mounted Roof to Roof EJ Cover	DWG	PDF

*ALSO REFER TO SPECIALTY ROOFING PRODUCTS TRANSITION & INTERSECTION DETAILS


CURBS AND CORNERS	CAD	PDF
BIT-8 Prefabricated Curb	DWG	PDF
BIT-26 Base Flashing at Outside Corner	DWG	PDF
BIT-27 Base Flashing at Inside corner	DWG	PDF


DRAINS, PIPES, AND VENTS	CAD	PDF
BIT-9 Plumbing Vent	DWG	PDF
BIT-10 One Way Roof Vent - FP-10	DWG	PDF
BIT-11 Metal Drain	DWG	PDF
BIT-21 Primary Metal Scupper in Sump	DWG	PDF
BIT-22 Overflow Metal Scupper	DWG	PDF
BIT-23 Vent Stack (Warm)	DWG	PDF


PENETRATION, EQUIPMENT SUPPORT AND PROTECTION	CAD	PDF
BIT-16 Roof Penetration Pan	DWG	PDF
BIT-17 Lighting Rod on Roof Surface	DWG	PDF
BIT-PT-01 Bituminous Light Support	DWG	PDF
BIT-PT-02 Bituminous Medium Support	DWG	PDF
BIT-PT-03 Bituminous Heavy Support	DWG	PDF
BIT-PT-04 DynaTred Traffic Pads with Pavers	DWG	PDF
BIT-PT-05 DynaTred Traffic Pads	DWG	PDF


*WALL FLASHING*	*CAD*	*PDF*
BIT- 1 (LB) Base Flashing for Load Brng Wall with Counterflashing	DWG	PDF
BIT-2 (WL) Base Flashing for Wall less than 24 inches	DWG	PDF
BIT-3 (WH) Base Flashing for Wall more than 24 inched with Coping	DWG	PDF
BIT-3 (WL) Base Flashing for Wall less than 24 inches with Coping	DWG	PDF
BIT-6 (TH) Base Flashing for Wall more than 24 inches with Coping	DWG	PDF
BIT-6 (TL) Base Flashing for Wall less than 24 inches with Coping	DWG	PDF
BIT-15 (E) EPDM Wall Covering with BUR Base Flashing	DWG	PDF
BIT-15 (E) Alt-EPDM Wall Covering with BUR Base Flashing	DWG	PDF
BIT-15 (P) PVC Wall Covering with BUR Base Flashing	DWG	PDF
BIT-15 (T) TPO Wall Covering with BUR Base Flashing	DWG	PDF


EDGE	CAD	PDF
DFE-4 (PRESTO LOCK) Facia, Presto Lock™ Fascia System	DWG	PDF
DFE-4 (GS) Gravel Stop	DWG	PDF
DFE-4 (GS-ALT) Gravel Stop (Alternate)	DWG	PDF
DFE-4 (GTR) Gutter	DWG	PDF
DFE-4 (PRESTO-TITE) Presto-Tite	DWG	PDF
DFE-4 (RFS) Rail Fascia System Roof Edge	DWG	PDF
DFE-4 (RMCF) Raised Metal Cant Fasia	DWG	PDF


EXPANSION, TIE-IN AND TRANSITION	CAD	PDF
DFE-1 (NLB) Curb to Wall Expansion Joint	DWG	PDF
DFE-5 (NLB-ALT) Metal Expansion Joint (Alternate)	DWG	PDF
DFE-7 Roof-to-Roof, Curb Mounted, Expand-O-Flash®	DWG	PDF


CURBS AND CORNERS	CAD	PDF
DFE-27 Inside Corner	DWG	PDF
DFE-26 Outside Corner	DWG	PDF
DFE-8 Prefabricated	DWG	PDF
DFE-8 (Skylight) Hot & Cold Prefabricated Curb	DWG	PDF
DFE-19 Roof Hatch Curb	DWG	PDF


DRAINS, PIPES, AND VENTS	CAD	PDF
DFE-11 Metal	DWG	PDF
DFE-22 Overflow Metal Scupper	DWG	PDF
DFE-21 Primary Metal Scupper In Sump	DWG	PDF


PENETRATION, EQUIPMENT SUPPORT AND PROTECTION	CAD	PDF
DFE-17 Lightning Rod, Surface Mount	DWG	PDF
DFE-16 Penetration Pocket	DWG	PDF
DFE-10 FP-10 One Way® Roof Vent	DWG	PDF
DFE-9 Plumbing, Lead	DWG	PDF
DFE-23 Vent Stack (Warm)	DWG	PDF
DFE-18 JM Energy Anchor - SBS Adhered	DWG	PDF


WALL FLASHING	CAD	PDF
DFE-1 (LB) Masonry Wall with Counter Flashing	DWG	PDF
DFE-2 (LB) Two Ply Base Flashing for LB Masonry Wall Counter Flashing	DWG	PDF
DFE-2 (PT) Perma Tite Coping	DWG	PDF
DFE-2 Base Flashing with Surface Mounted Counter Flashing	DWG	PDF
DFE-3 (WH) Wood Wall > 24" with Coping	DWG	PDF
DFE-3 (WL) Wood Wall < 24" with Coping	DWG	PDF
DFE-6 (TH) Masonry Wall > 24" with Coping	DWG	PDF
DFE-6 (TL) Masonry Wall < 24" with Coping	DWG	PDF
DFE-15 (E) EPDM Wall Covering with Bituminous Base Flashing	DWG	PDF
DFE-15 (P) PVC Wall Covering With Bit Base Flashing	DWG	PDF
DFE-15 (T) TPO Wall Covering with Bituminous Base Flashing	DWG	PDF
DFE-15 (ALT) TPO Wall Covering with Bituminous Base Flashing (Alternate)	DWG	PDF
DFE-20 (WH) Gypsum Wall on Metal Studs > 24" w/Coping	DWG	PDF
DFE-20 (WL) Gypsum Wall on Metal Studs < 24" w/Coping	DWG	PDF
DFE-24 Base Flashing for Venting Lightweight Concrete	DWG	PDF

LAP ANGLE CHANGE	CAD	PDF
PMF-10 PermaFlash® Standard Base Flashing Detail	DWG	PDF
PMF-9 PermaFlash® Standard Canted Base Flashing Detail	DWG	PDF


CURBS AND CORNERS	CAD	PDF
PMF-3 PermaFlash® Inside Corner Detail	DWG	PDF
PMF-3S PermaFlash® Inside Corner Scrim Detail	DWG	PDF
PMF-4 PermaFlash® Curb Corner Detail	DWG	PDF
PMF-4Sa PermaFlash® Outside Corner Scrim Detail (Top)	DWG	PDF
PMF-4Sb PermaFlash® Outside Corner Scrim Detail (Bottom)	DWG	PDF


DRAINS PIPES AND VENTS	CAD	PDF
PMF-5 PermaFlash®-To-Drain-Detail	DWG	PDF
PMF-5S PermaFlash® Drain Scrim Detail	DWG	PDF
PMF-6 PermaFlash® Pipe Penetration Detail	DWG	PDF
PMF-6S PermaFlash® Pipe Penetration Scrim Detail	DWG	PDF
PMF-7 PermaFlash® Through-Wall Scupper Detail	DWG	PDF
PMF-7S PermaFlash® Through-Wall Scupper Scrim Detail	DWG	PDF
PMF-8 PermaFlash® Overflow Scupper Detail	DWG	PDF
PMF-8S PermaFlash® Overflow Scupper Scrim Detail	DWG	PDF


PENETRATION, EQUIPMENT SUPPORT AND PROTECTION	CAD	PDF
PMF-1 PermaFlash® I-Beam Detail	DWG	PDF
PMF-11 PermaFlash® Square Metal Tube Detail	DWG	PDF
PMF-11S PermaFlash® Square Metal Tube Scrim Detail	DWG	PDF
PMF-1S PermaFlash® I-Beam Scrim Detail	DWG	PDF
PMF-2 PermaFlash® Angle Iron Detail	DWG	PDF
PMF-2S PermaFlash® Angle Iron Scrim Detail	DWG	PDF


EDGE	CAD	PDF
HW-4 (GS) Gravel Stop	DWG	PDF
HW-4 (GS-ALT) Gravel Stop Alternate	DWG	PDF
HW-4 (GTR) Gutter	DWG	PDF
HW-4 (PRESTO LOCK) Presto Lock Fascia System	DWG	PDF
HW-4 (PRESTO-TITE) Presto-Tite Edge Metal System	DWG	PDF
HW-4 (RMCF) Raised Metal Cant Fascia	DWG	PDF
HW-4 (GTR-ALT) Roof Edge Gutter ALT	DWG	PDF
HW-4 (RFS) Rail Fascia System Roof Edge	DWG	PDF


HEAT WELDABLE EXPANSION JOINT DETAILS*	*CAD*	*PDF*
HW-1 (NLB) Base Flashing Curb to Wall EJ	DWG	PDF
HW-5 (NLB-ALT) Base Flashing Metal EJ ALT	DWG	PDF
HW-7 Curb Mounted Roof-to-Roof Expansion Joint Cover	DWG	PDF

*ALSO REFER TO SPECIALTY ROOFING PRODUCTS TRANSITION & INTERSECTION DETAILS


CURBS AND CORNERS	CAD	PDF
HW-8 Prefabricated Curb	DWG	PDF
HW-19 Roof Hatch Curb	DWG	PDF
HW-26 Base Flashing at Outside Corner	DWG	PDF
HW-27 Base Flashing at Inside Corner	DWG	PDF


*DRAINS, PIPES AND VENTS*	*CAD*	*PDF*
HW-9 Plumbing Vent	DWG	PDF
HW-10 FP-10 One Way® Roof Vent	DWG	PDF
HW-11 Metal Drain	DWG	PDF
HW-21 Primary Metal Scupper in Sump	DWG	PDF
HW-22 Overflow Metal Scupper	DWG	PDF
HW-23 Vent Stack (Warm)	DWG	PDF


PENETRATION, EQUIPMENT SUPPORT AND PROTECTION	CAD	PDF
HW-17 Lightning Rod on Roof Surface	DWG	PDF
HW-16 Penetration Pocket	DWG	PDF
HW-18 JM Energy Anchor	DWG	PDF


WALL FLASHING	CAD	PDF
HW-1 (LB) Masonry Wall w/ Counterflashing	DWG	PDF
HW- 2 (PT) Perma Tite Coping	DWG	PDF
HW-3 (WH) Wood Wall >24” with Coping	DWG	PDF
HW-3 (WL) Wood Wall <24” with Coping	DWG	PDF
HW-6 (TH) Masonry Wall >24” with Coping	DWG	PDF
HW-6 (TL) Masonry Wall <24” with Coping	DWG	PDF
HW- 6 (TL) ALT - Base Flashing For Masonry Wall	DWG	PDF
HW-15 (E) EPDM Wall Covering with Bituminous Base Flashing	DWG	PDF
HW-15 (P) PVC Wall Covering With Bit Base Flashing	DWG	PDF
HW-15 (T) TPO Wall Covering with Bituminous Base Flashing	DWG	PDF
HW-15 (T-ALT) TPO Wall Covering with Bituminous Base Flashing	DWG	PDF
HW-20 (WH) Gypsum Wall on Metal Studs >24” w/ Coping	DWG	PDF
HW-20 (WL) Gypsum Wall on Metal Studs <24” w/ Coping	DWG	PDF
HW-24 Venting Lightweight Concrete	DWG	PDF
HW-25 (LB) Optional Two-Ply Base Flashing for Load-Bearing Masonry Wall w/ Counterflashing	DWG	PDF


EDGE	CAD	PDF
DGE-4 (GS) Gravel Stop	DWG	PDF
DGE-4 (GS-ALT) Gravel Stop, Alternate	DWG	PDF
DGE-4 (GTR) Gutter	DWG	PD F
DGE-4 (PL) Roof Edge With Presto Lock	DWG	PDF
DGE-4 (PT) Roof Edge With Presto Lock	DWG	PDF
DGE-4 ( RMCF) Roof Edge Raised Metal Cant	DWG	PD F


EXPANSION, TIE-IN AND TRANSITION	CAD	PDF
DGE-1 (NLB) Masonry With Nailing Facilities, Expansion Joint	DWG	PDF
DGE-7 Roof-to-Roof, Curb Mounted, Expand-O-Flash®	DWG	PDF


CURBS AND CORNERS	CAD	PDF
DGE-8 Prefabricated	DWG	PDF
DGE-8 (ALT) Prefab Curb With Skylight	DWG	PDF
DGE-19 Roof Hatch Curb	DWG	PDF


DRAINS, PIPES, AND VENTS	CAD	PDF
DGE-9 Plumbing, Lead	DWG	PDF
DGE-10 FP-10 One Way® Roof Vent	DWG	PDF
DGE-11 Roof Drain	DWG	PDF


PENETRATION, EQUIPMENT SUPPORT AND PROTECTION	CAD	PDF
DGE-17 Lightning Rod, Surface Mount	DWG	PDF
DGE-16 Penetration Pocket	DWG	PDF


WALL FLASHING	CAD	PDF
DGE-1 (LB) Masonry With Nailing Facilities	DWG	PDF
DGE-2 (LB) Two Ply Base Flashing for LB Masonry Wall Counter Flashing	DWG	PDF
DGE-2 Base Flashing with Surface Mounted Counter Flashing	DWG	PDF
DGE-3 (HW) Base Flashing for Wood Wall +24 Inches with Coping	DWG	PDF
DGE-3 (LW) Base Flashing for Wood Wall -24 Inches with Coping	DWG	PDF
DGE-6 (TH) Tilt-Up, High	DWG	PDF
DGE-6 (TL) Tilt-Up, Low	DWG	PDF
DGE-15 Single Ply Wall Covering with BIT Base Flashing	DWG	PDF


EDGE	CAD	PDF
CBE-4 (GS) Roof Edge Gravel Stop	DWG	PDF
CBE-4 (GS-ALT) Roof Edge Gravel Stop Alternate	DWG	PDF
CBE-4 (GTR) Roof Edge Gutter	DWG	PDF
CBE-4 (PL) Roof Edge with Presto Lock	DWG	PDF
CBE-4 (PT) Roof Edge Raised Metal Cant	DWG	PDF
CBE-4 (RMCF) Roof Edge Raised Metal Cant	DWG	PDF


EXPANSION, TIE-IN AND TRANSITION	CAD	PDF
CBE-1 (NLB) Masonry With Nailing Facilities, Expansion Joint	DWG	PDF
CBE-7 Curb Mounted Roof to Roof EJ	DWG	PDF


CURBS AND CORNERS	CAD	PDF
CBE-8 Prefabricated	DWG	PDF
CBE-8 (ALT) Prefab Curb With Skylight	DWG	PDF
CBE-19 Roof Hatch Curb	DWG	PDF


DRAINS, PIPES, AND VENTS	CAD	PDF
CBE-9 Plumbing, Lead	DWG	PDF
CBE-10 FP-10 One Way® Roof Vent	DWG	PDF
CBE-11 Cast Iron	DWG	PDF


PENETRATION, EQUIPMENT SUPPORT AND PROTECTION	CAD	PDF
CBE-17 Lightning Rod, Surface Mount	DWG	PDF
CBE-16 Penetration Pocket	DWG	PDF


WALL FLASHING	CAD	PDF
CBE-1 (LB) Masonry With Nailing Facilities	DWG	PDF
CBE-2 (LB) Two Ply Base Flashing for LB Masonry for LB Masonry Wall Counter Flashing	DWG	PDF
CBE-2 Base Flashing with Surface Mounted Counter Flashing	DWG	PDF
CBE-3 (HW) BASE FLASHING FOR WOOD WALL +24 INCHES WITH COPING	DWG	PDF
CBE-3 (LW) BASE FLASHING FOR WOOD WALL -24 INCHES WITH COPING	DWG	PDF
CBE-6 (TH) BASE FLASHING +24 INCHES WITH COPING ALT	DWG	PDF
CBE-6 (TL) BASE FLASHING FOR MASONRY WALL -24 INCHES WITH COPING	DWG	PDF
CBE-15 SINGLE PLY WALL COVERING WITH BIT BASE FLASHING	DWG	PDF


*DYNASET 1K DETAILS*	CAD	PDF
DS1K-1 JM DynaSet 1K Ribbon Adhered Base Ply	DWG	PDF
DS1K-2 JM DynaSet 1K Ribbon Adhered Base Ply - Heat Weld	DWG	PDF
DS1K-3 JM DynaSet 1K Ribbon - CBUA Adhered Base	DWG	PDF
DS1K-4 JM DynaSet 1K Ribbon Adhered Base Ply Lightweight Concrete	DWG	PDF
DS1K-5 JM DynaSet 1K Ribbon Adhered Base Ply Lightweight Concrete - Heat Weld	DWG	PDF

VAPOR BARRIER SA DETAILS	CAD	PDF	*BIM*
VB-1 JM Vapor Barrier SA - Wall Base Detail	DWG	PDF	-
VB-1 (ALT) JM Vapor Barrier SA - Wall Base Detail - Alt	DWG	PDF	-
VB-2 JM Vapor Barrier SA - Pipe Penetration Detail	DWG	PDF	-
VB-3 JM Vapor Barrier SA - Drain Detail	DWG	PDF	-
VB-4 JM Vapor Barrier SA - Detail at Field Laps	DWG	PDF	-
VB-5 JM Vapor Barrier SA - Outside Curb Detail	DWG	PDF	-
VB-6 JM Vapor Barrier SA - Inside Curb Detail	DWG	PDF	-

*VAPOR BARRIER SAR DETAILS*	CAD	PDF	*BIM*
VB-1 JM Vapor Barrier SAR - Wall Base	DWG	PDF	-
VB-1 (ALT) JM Vapor Barrier SAR - Wall Base	DWG	PDF	-
VB-2 JM Vapor Barrier SAR - Pipe Penetration	DWG	PDF	-
VB-3 JM Vapor Barrier SAR - Drain	DWG	PDF	-
VB-4 JM Vapor Barrier SAR - Field Laps	DWG	PDF	-
VB-5 JM Vapor Barrier SAR - Outside Curb	DWG	PDF	-
VB-6 JM Vapor Barrier SAR - Inside Curb	DWG	PDF	-

2x4 Ft. Roof Insulation Fastener Placement

4x8 Ft. Roof Insulation Fastener Placement

BM-18, 12, 6 DynaFast Base Sheet (18", 12", 6" O.C.)

BM-12,12,12 Mechanically Fastened Base Sheet (12", 12", 12" O.C.)

BM-18 Mechanically Fastened Base Sheet (18" O.C.)

BM-6 Mechanically Fastened Base Sheet (6" O.C.)

BM-7,7,7 Mechanically Fastened Base Sheet (7", 7", 7" O.C.)

BM-7,9,9 Mechanically Fastened Base Sheet (7", 9", 9" O.C.)

BM-75,75,75 Mechanically Fastened Base Sheet (7.5", 7.5", 7.5" O.C.)

BM-9,12,12 Mechanically Fastened Base Sheet (9", 12", 12" O.C.)

BM-9,18,18 Mechanically Fastened Base Sheet (9", 18", 18" O.C.)

BM-9,9,9 Mechanically Fastened Base Sheet (9", 9", 9" O.C.)

FA-16 Fully Adhered Cover (16-24-32)

FA-8 Fully Adhered Cover (8-16-32)

CBUA-12-6-4 Cover Board Urethane Adhesive Fastening

ICBUA-8-4-4 Insulation and Cover Board Urethane Adhesive Fastening

ICBUA-12-6-4 Insulation and Cover Board Urethane Adhesive Fastening

INUA-12-6-4 Insulation Urethane Adhesive Fastening

Assembly Plate Use Instructions

*Please be sure to download the file before selecting your assembly.*

SBS Assembly Plates

2 PLY SBS BONDED TO INSULATION ASSEMBLY PLATE

2 PLY SBS MECHANICALLY FASTENED BASE SHEET OVER INSULATION ASSEMBLY PLATE

3 PLY SBS BONDED TO INSULATION ASSEMBLY PLATE

3 PLY SBS INCLUDING NAILED BASE SHEET ASSEMBLY PLATE

3 PLY SBS MECHANICALLY FASTENED BASE SHEET OVER INSULATION ASSEMBLY PLATE

4 PLY SBS BONDED TO INSULATION ASSEMBLY PLATE

4 PLY SBS INCLUDING NAILED BASE SHEET ASSEMBLY PLATE

Download the 3-Part SBS Master Spec

Download the 3-Part PVC/SBS Hybrid Master Spec

Installation Guides

JM SBS Installation Application Guide

JM Vapor Barrier SA Installation Guide

JM Vapor Barrier SA Installation Guide - Español

PermaFlash® Bituminous Flashing System Detail Instructions

PermaFlash®Bituminous Flashing System Detail Instructions - Español

PermaFlash® Bituminous Flashing System Penetration Flashing

PermaFlash® Bituminous Flashing System Penetration Flashing - Español

Additional Resources

Johns Manville Approved Asphalt Supplier List

SBS Membrane Selector Guide

SBS Membrane Selector Guide - Español

Adhesives and Cements Selector Guide

Insulation and Cover Board Selector Guide

Insulation and Cover Board Selector Guide - Español

Coatings Selector Guide

Coatings Selector Guide - Español

Fasteners and Plates Selector Guide

Resources

Tools

Building Owner Resources

Johns Manville offers one of the most comprehensive portfolios of commercial low-slope roofing solutions. We have a long standing dedication to providing solution-based systems for building owners.

Codes Corner

Here you will find quick links and cheat sheets to Johns Manville roofing systems code approvals and ratings.

Guarantees and Roof Maintenance

Support services can include: conceptual product information, building science, wind uplift data, national and local code understanding, FM Global® and UL® regulations, fastening patterns and sheet layouts, installation guidelines and standard details.

Recycling Resources

Re-roofing mechanically attached or ballasted insulated single-ply systems now have the potential for recycling versus contributing to a landfill.

SmartBinder Resource Library

Your resource for all JM documents in one place.

Submittal Wizard

The Submittal Wizard is a tool to help you pull together the necessary documents for your submittal package.

Explore More

Commercial Roofing News

DynaWeld 250 S

DynaWeld 250 S

Featured Documents

Product Details

DynaWeld 250 S

Features

DynaWeld 250 S

Documents

SBS Installation and Details

Assembly Plate Use Instructions

SBS Assembly Plates

Download the 3-Part SBS Master Spec

Download the 3-Part PVC/SBS Hybrid Master Spec

Installation Guides

Additional Resources

Sign Up for More Roofing News and Events

Resources

Explore More

Blog

Video Library

Training

DynaWeld 250 S

DynaWeld 250 S

Featured Documents

Product Details

DynaWeld 250 S

Features

DynaWeld 250 S

Documents

SBS Installation and Details

Bituminous Flashing Details (BIT)

Edge

Expansion, Tie-In and Transition

Curbs and Corners

Drains, Pipes and Vents

Penetration, Equipment Support and Protection

Wall Flashing

DynaFlex® Flashing Details (DFE)

Edge

Expansion, Tie-In and Transition

Curbs and Corners

Drains, Pipes and Vents

Penetration, Equipment Support and Protection

Wall Flashing

PermaFlash® Flashing Details (PMF)

Lap Angle Change

Curbs and Corners

Drains, Pipes and Vents

Penetration, Equipment Support and Protection

Heat Weldable Flashing Details

Edge

Expansion Joints

Curbs and Corners

Drains, Pipes and Vents

Penetration, Equipment Support and Protection

Wall Flashing

DynaGrip® Flashing Details (DGE)

Edge

Expansion, Tie-In and Transition

Curbs and Corners

Drains, Pipes and Vents

Penetration, Equipment Support and Protection

Wall Flashing

JM CleanBond® Flashing Details (CBE)

Edge

Expansion, Tie-In and Transition

Curbs and Corners

Drains, Pipes and Vents

Penetration, Equipment Support and Protection

Wall Flashing

DynaSet 1K (DS1K) Details

Vapor Barrier (VB) Details

Assembly Plate Use Instructions

SBS Assembly Plates

Download the 3-Part SBS Master Spec

Download the 3-Part PVC/SBS Hybrid Master Spec

Installation Guides

Additional Resources

Sign Up for More Roofing News and Events

Resources

Explore More

Blog

Video Library

Training