Fasteners and Plates

Built to withstand the test of time, our PVC was made to resist the toughest weather conditions and chemicals.

Our PVC is a flexible, thermoplastic membrane manufactured using an ultraviolet-resistant polyvinyl chloride. PVC membranes deliver a pliable and durable sheet with excellent weathering characteristics and resistance to harsh chemicals and industrial pollutants.

Filter Products By
  • Roofing Systems
  • Filter By
Jump To
#14 case-hardened steel insulation and membrane fastener with a #3 Phillips head.

All Purpose Fasteners are #14 case-hardened steel fasteners with a #3 Phillips head. The point is designed for quick installation in new or re-roof applications.

Use: Membranes and Insulation
Material: Case-hardened steel
Gauge: #14
Head: #3 Phillips head
Color: Grey
Deck Types: Wood, Concrete, and 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.

Plate Compatibility*
• UltraFast® Locking Plastic Plates
• UltraFast® Metal Plates
• High Load Plates (not pictured)
• APB Plates (not pictured)
• RhinoPlate (concrete decks)


* See corresponding data sheets for information regarding UltraFast, High Load, and APB Plates.

All Purpose Fasteners 142x87

Selector Guides

Fastener and Plates Selector Guide

Available Documents

Photovoltaic solution replacing ballast in traditional rail-mounted systems.

ENRGY™ Anchor is a lightweight, roof-top integrated, photovoltaic (PV)-mounting solution consisting of a Galvalume®*-coated steel plate welded to a stainless steel stud, with a JM membrane flashing target. Each assembly includes a leveling washer and membrane separator.

High Wind Rating: Unlike a ballasted system, ENRGY Anchor can be installed on most buildings in high wind zones without adding substantially more weight. The systems can be installed flat and nearly flush to further reduce wind load.

Lightweight: When paired with a racking system and PV modules, installed distributed loads are typically between 2.5 – 4.0 pounds per square foot.

Design Flexibility: The ENRGY Anchor is compatible with most rack-mounted solutions. Whether the PV-mounting solution calls for a ballasted or penetrating attachment, substituting the ENRGY Anchor provides a guarantee included and more roofing friendly solution that saves labor dollars.

Color: Dependent on system

* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

brochures

The ENRGY™ Anchor Advantage

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

#21 fasteners with a corrosion-resistant coating, #3 Phillips head and a drill point.

Extra High Load Fasteners are #21 fasteners with a #3 Phillips head. The point is designed for quick installation in new and re-roof applications. Extra High Load Fasteners are only compatible with Extra High Load Plates.

The Extra High Load Plate is a 3" (7.62 cm) diameter, Galvalume®*-coated steel plate with eye hooks. The Extra High Load Plate incorporates an oversized diameter hole to accommodate the larger wire size of the Extra High Load Fastener.

Use: Thermoplastic Membranes

Material: Extra High Load Fastener - Case-hardened steel
                 Extra High Load Plate - Galvalume-Coated Steel

Gauge: #21

Head: #3 Phillips head

Plate: 3" (7.6 cm) round

Color: Black (fasteners), Grey (plates)

Deck Types: Wood or 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.

* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Premier one-step, automated, single-ply membrane seam-fastening system.

The High Load AccuSeam System is a premier automated system for mechanically attached seams. The System positions the 23⁄8" (6.03 cm), round, High Load Plate with eye hooks, and installs the High Load Fastener, up to 6" (15.24 cm) in length in a one-step, continuous process. Standard High Load Plates are not compatible with the AccuSeam Fastener and Plate System.

Use: Membranes
Material: High Load Fastener - Case-hardened steel
                    High Load AccuSeam Plate - Galvalume®*-Coated Steel
Gauge: #15
Head: #3 Phillips head
Plate: 23⁄8" (6.03 cm) round
Color: Blue (fasteners), Grey (plates)
Deck Type: Wood or 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.

* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

High-Load-Accuseam-Fastener-and-Plate-System 700x7881

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

#15 case-hardened steel roof membrane fastener and GALVALUME®-coated steel seam plates.

High Load Fasteners are #15 fasteners with a #3 Phillips head. The point is designed for quick installation in new and re-roof applications. High Load Fasteners are pre-assembled with FM Global® approved High Load Plates.

High Load Plates are 23⁄8" (6.03 cm) round, 20-gauge (0.9 mm) Galvalume®*-coated steel discs.

Use: Membranes
Material: High Load Fastener - Case-hardened steel
                 High Load Plate - Galvalume-Coated Steel
Gauge: #15
Head: #3 Phillips head
Plate: 23⁄8" (6.03 cm) round
Color: Blue (fasteners), Grey (plates)
Deck Type: Wood or 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.

* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

High-Load-Fasteners-(Pre-Assembled)

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

#15 case-hardened steel roof membrane fastener with GALVALUME®-coated steel seam plates.

High Load Plates are heavy duty, Galvalume®*-coated steel seam plates with eye hooks.

High Load Plus Plates are heavy duty, Galvalume-coated steel seam plates with barbs.

Use: Membranes
Material: Galvalume-Coated Steel
Gauge: 20-Gauge Steel
Size:  High Load Plate - 2 3⁄8" (6.03 cm) round
            High Load Plus Plate - 2 3/4” (6.99 cm) round
            JM 90 Seam Plate - 3" (7.62 cm) round

Color: Grey (Galvalume-coated steel)

High-Load-Fasteners-(Pre-Assembled)

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Insulation and Membrane Fastening Plate

JM isoweld is 3.12" (79.2 mm) round G-90 steel plate with a flat bonding surface of proprietary TPO or PVC adhesive coating. Utilizing induction weld technology, JM isoweld simultaneously fastens the insulation and membrane.

Use: Insulation, TPO and PVC Membranes
Material: G-90 steel with proprietary coating
Plate: 3.12" (7.9 cm) round
Color: TPO = Yellow, PVC = Purple
Deck Type: Wood, Steel, or Structural Concrete Fastener Compatibility

Designed to be used with JM #15 Dekfast Fasteners.

JM #15 Dekfast Fastener is a corrosion-resistant e-coat #15 fastener with a #3 Phillips head, and a drill point designed for quick installation in new or re-roof applications.

Use: JM isoweld® system only
Material: Carbon Steel
Gauge: #15
Head: #3 Phillips head
Color: Black
Deck Type: Wood, 18 - 24 gauge (1.25 mm - 0.56 mm) Steel, or structural concrete.

JM-isoweld

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Steel-coated roof membrane fastener with a 1⁄4" hex head and 3⁄4" drill point.

The JM Purlin Fastener is a steel-coated fastener with a ¼" hex head and ¾" (19 mm) drill point. The drill point allows the fastener to be drilled through the purlin before the threads engage into the standing seam metal roof.

Use: Membranes

Material: Steel Coated Fasteners

Gauge: #12 Head: ¼" Hex Head

Plate: 23⁄8" (6.03 cm) round

Color: Grey

Deck Type: Structural Steel Purlins 12 - 18 gauge (2.77 mm - 1.25 mm) Metal.

JM-Purlin-Fastener-700x7331

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Coated GALVALUME® insulation and PVC membrane fastening plate with recessed center and raised flat-bonding surface.

JM PVC RhinoPlate is a 3" (76.2 mm) round specially coated Galvalume®* plate with a recessed center and raised flat bonding surface. The JM PVC RhinoPlate is a roof attachment system that uses heat induction technology.

Use: Insulation and PVC Membranes

Material: Specially Coated Galvalume Plate: 3" (7.6 cm) round

Color: Black

Deck Type: Wood, Steel, Structural Concrete, or Structural Purlins

* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers. Fastener Compatibility Designed to be used with Johns Manville High Load Fasteners

PVC-RHINOPLATE-700x7311

brochures

The JM RhinoPlate® System

installation guides

RhinoPlate® Installation Guide

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Roof Membrane and Insulation Fastener.

JM RetroDriller Fastener is designed for attaching single ply membrane systems to structural purlins (up to 3 /16”) in standing seam metal roof retrofit applications.

Use: PVC and TPO Membranes and Insulation

Material: CR-10 coated steel Head: #3 square head

Deck Types: Structural purlins seam metal.

Retrodriller product Image 447x339

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Single ply membrane fastening systems include termination bars, anchor discs and masonry nail-in anchors.

Termination Bars are 1.34" (3.4 cm) wide, extruded, pre-punched aluminum strips.

Anchor Discs are 2" (5.1 cm) diameter, round, Galvalume®*-coated steel discs.

Masonry Nail-In Anchors are one-piece zinc anchors designed for fastening to concrete or masonry walls.

Use: Membranes

Materials:
    High Load Fasteners - Corrosion-Resistant Steel
    Zinc Nail-In Anchors - Zinc-Coated Steel
    Anchor Discs - Galvalume
    Termination Bars - Extruded Aluminum

Color: Various

Deck Types: High Load Fasteners - Wood and 18-24 Gauge Metal Zinc Nail-In Anchors - Concrete and Masonry

*Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Insulation Fasteners and plates.

Lite-Deck Fasteners are available in lengths from 2 5/8” to 12" (67 mm to 305 mm), come with a square drive and offer coarse thread to provide high pullout resistance.

Lite-Deck plates are 3" (76 mm) round, Galvalume®*-coated plates for use with Lite-Deck Fasteners.

Use: Insulation

Fastener: Steel

Head: #3 Square Drive

Plate: 3" (76 mm) Galvalume-Coated Steel - Round

Color: Black (fasteners) Grey (plates)

Deck Type: Gypsum, and Cementitious Wood Fiber

* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

lite deck Fasteners Image A 447x339

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Nailboard (Regular and Vented) Fastener for use with steel decks

Nail-Lok SD is utilized with steel decks in several panel applications including Nailboard, Vented Nailboard, structural insulated panels (SIP), and prefabricated wall panels. The extra-large star/spider head increases pull-through resistance and eliminates the need for plates or washers.

Use: Nailboard and Vented Nailboard Fastener.

Material: 10B21 steel with a corrosion-resistant coating.

Shank: 0.190” diameter Head: 0.625” diameter star/spider drive (free drive bits in each bucket).

Point: Spade

Color: Black Deck Types: 18-24 gauge steel
Structural Concrete (Predrilling is required with a pilot at least ½” deeper than fastener embedment. Pilot hole size varies, perform a pull-test to determine proper drill bit size).

Nail-Lok SD

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Nailboard (Regular and Vented) Fastener for use with wood decks.

Nail-Lok WD is utilized with wood decks in several panel applications including Nailboard, Vented Nailboard, structural insulated panels (SIP), and prefabricated wall panels. The extra-large star/spider head increases pull-through resistance and eliminates the need for plates or washers.

Use: Nailboard and Vented Nailboard Fastener.

Material: 10B21 steel with a corrosion-resistant coating.

Shank: 0.190” diameter

Head: 0.625” diameter star/spider drive (Free drive bits in each bucket).

Point: Gimlet

Color: Black Deck Type: Wood

NAIL-LOK-WD-700x6321

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Solid glass-reinforced nylon membrane and insulation fasteners.

Polymer Auger Fasteners are glass-reinforced nylon fasteners with an internal ¼" (6 mm) square drive. Polymer Auger Fasteners have a 1" (2.5 cm) diameter head.

Polymer Auger Fasteners are available with Galvalume®*-coated, metal stress plates, designed to lock into the fastener head.

Use: Insulation and Membranes

Material: Fasteners - Polymer
                 Plates - Galvalume-Coated Steel

Gauge: 0.675" Diameter Screw

Head: 1" (2.5 cm) Diameter, ¼" (6 mm) Square Drive

Plates: 2" (5.1 cm) or 3" (7.6 cm) Round

Color: Black (fasteners), Grey (plates)

Deck Types: Cementitious Wood Fiber or Gypsum

* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

METAL DECK SPECIALTY ATTACHMENT

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Diamond point, nonthreaded carbon steel insulation and membrane fastener.

Structural Concrete Deck Fasteners are diamond point, non-threaded fasteners for hammer-in installation of insulation and single ply membranes to structural concrete. These carbon steel fasteners have a corrosion-resistant coating.

Use: Insulation and Membranes

Material: Diamond Point, Corrosion-Resistant Coated Carbon Steel

Head: Flat

Color: Black

Deck Type: Structural Concrete

Plate Compatibility*

  • UltraFast® Flat-Bottom, Metal Plates
  • APB Plates
  • High Load Plates

* See corresponding data sheets for information regarding UltraFast, APB and High Load Plates.

Structural-Concrete-Fasteners-and-Plates-700x774

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Insulation fastening system.

The UltraFast AccuTrac Fastener and Plate System utilizes the standard UltraFast Fastener and the UltraFast Accutrac, recessed or flat bottomed, square plate. The AccuTrac tool positions the plate and installs fasteners 15⁄8" - 6" (4.13 cm - 15.24 cm) in a one-step process. Consistent vertical alignment of fasteners ensures maximum thread engagement and pullout performance.

Use: Membranes

Material: Fasteners - Case-Hardened Steel
                Plates - Galvalume®*-Coated Steel

Gauge: #12

Head: #3 Phillips Head

Plate: UltraFast AccuTrac™ - 3" (7.62 cm) Square**

Color: Blue (fasteners), Grey (plates)

Deck Type: Wood or 18 - 24 gauge (1.25 mm - 0.51 mm) Metal.

*Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

**Standard UltraFast Plates are not compatible with this system.

Ultrafast-Accutrac-Fastener-&-Plate-System-700x8071

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

#12, case-hardened steel, polymer-coated fastener with GALVALUME®-Metal or Locking Plastic Plates.

The UltraFast Fastener is a #12, case-hardened steel, polymer-coated fastener with a buttress thread design that provides maximum pullout values and minimizes fastener backout. Available with either a #3

Phillips head or a ¼" (6.35 mm) hex head. The drill point is designed for quick installation in new or re-roof applications, and provides exceptional drilling capability in higher tensile decks.

Use: Insulation
Material: Fasteners - Case-Hardened Steel, Polymer-Coated
Gauge: #12
Head: #3 Phillips Head or ¼" (6.35 mm) Hex Head
Color: Blue
Deck Types: Wood or 18 - 24 gauge (1.25 mm - 0.51 mm) Metal

 

UltraFast Locking Plastic Plates are 3” (7.62 cm) round, high strength polypropylene plates with a special locking feature.

UltraFast Metal Plates are 3” (7.62 mm) round or square, premium Galvalume®*-coated steel metal plates.

Use: Insulation
Material: Plates - Galvalume-Coated Steel or High Strength Polypropylene
Gauge: 26 Gauge Steel
Plates: 3" (7.62 cm) Round Locking Plastic & Round or Square Metal
Colors: Grey (metal plates), Blue (plastic plates)
*Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

Ultrafast-Fasteners-and-Plates-700x811

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

GALVALUME®-coated steel 3" nominal square plate used with UltraFast #12 or #14 fasteners.

The UltraFast® Plus Plate is made of Galvalume®*-coated steel. The 3" (7.62 cm) nominal square plate is 0.010" (0.25 mm) thicker than the standard UltraFast square metal plate, providing a stiffer surface area to improve wind uplift performance of the system. The plate is used for fastening Invinsa® Roof Board to the roof deck in fully adhered single ply systems. The plate is designed to be used with UltraFast #12 or #14 fasteners.

Use: Cover Board

Material: Galvalume®-Coated Steel

Thickness: 0.028" (0.71 mm)

Plates: 3" (7.62 cm) nominal Square Metal

Colors: Grey (metal plates)

Deck Types: Wood or 18 - 22 gauge (1.25 mm - 0.76 mm) Metal

*Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

Ultrafastplate-700x928

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Polymer-coated fastener with GALVALUME®-Metal or Locking Plastic Plates.

The UltraFast Pre-Assembled Fastener is a #12, case-hardened steel, polymer-coated fastener with a buttress thread design that provides maximum pullout values and minimizes fastener backout.. Available with a #3 Phillips head or ¼" (6.35 mm) hex head (available by special order only). The drill point is designed for quick installation in new or re-roof applications, and provides exceptional drilling capability in higher tensile decks. The UltraFast Locking Plastic Plate prevents fastener pop-up.

Use: Insulation

Material: Fasteners - Case-Hardened Steel, Polymer-Coated
                Plates - Galvalume®*-Coated Steel or Plastic

Gauge: #12

Head: #3 Phillips Head (¼" (6.35 mm) Hex Head is available by special order only)

Plates: 3" (7.62 cm) Round Locking Plastic or Round Metal

Colors: Blue (fasteners), Grey (metal plates), Blue (plastic plates)

Deck Types: Wood or 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.

* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

Fasteners-and-Plates-700x467

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents

Galvanized-steel tube and GALVALUME®-coated steel disc clamped to a wire-locking staple.

UltraLok Locking Impact Fasteners and Plates consist of a preassembled Galvanized steel tube, a 2.7" (6.86 cm) Galvalume®*-coated steel disc, and a precision-formed, coated- steel, high tensile, wirelocking staple. The disc is securely clamped to the tube and is rib-reinforced to resist cupping.

Use: Cover Boards and Base Sheets

Material: Tube - Galvanized Steel
                 Plates - Galvalume-Coated Steel
                 Locking Staple - Coated-Steel, High Tensile Wire

Plate: 2.7" (6.86 cm) Metal - Round

Color: Grey

Deck Types: Poured Gypsum, Cementitious Wood Fiber and LWIC Lightweight Insulating Concrete

* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers

Ultra-Locking-Impact-Fastener-700x8241

SELECTOR GUIDES

Fasteners and Plates Selector Guide

Available Documents