Spider Plus Blow-In - Canada
Johns Manville Spider® Plus Formaldehyde-free™ blow-in fibreglass insulation uses interlocking fibre technology to fill all gaps and voids quickly with no adhesive or netting for a faster installation. Spider Plus provides complete coverage, with no shrinking or settling, resulting in superior thermal performance and sound control. Designed for use in wood- and metal-frame construction, engineered- wood construction and manufactured homes.
Fast Drying: Dries immediately once installed.
Thermally Efficient: Effective resistance to heat transfer.
Formaldehyde-free: Will not off-gas formaldehyde in the indoor environment.
Sound Control: Reduces sound transmission through exterior and interior walls, floor and ceiling assemblies.
Fire-Resistant: Flame Spread of 25 or less and Smoke Developed of 50 or less.
Resilient Inorganic Glass: No rotting, mildew or deterioration. Also noncorrosive to pipes, wiring and metal studs.
|CCMC Evaluation Listing||13212-R|
|Standard for Mineral Fibre Thermal Insulation for Buildings||CAN/ULC-S702-09|
|Flame Spread||CAN/ULC-S102||≤ 25|
|Critical Radiant Flux||ASTM E970||Greater than 0.12 W/cmw2, passing for exposed attic installation|
|Water Vapour Sorption||ASTM C1104||5% or less by weight|
|Odour Emission||ASTM C1304||Pass|
|Fungi Resistance||ASTM G21, ASTM C1388||Pass|
|VOC Emission||ASTM D5116||Pass, EcoLogo|
|Thermal Transmission Properties||ASTM C518||Tested|
|Smoulder Resistance||CAN/ULC S129||Pass|