Resources
Products
Single Ply Commercial Roofing
Bituminous Commercial Roofing
Fasteners and Plates
With superior durability and flexibility, EPDM is a smart roofing solution.
Our EPDM production facility is one of the world's most technologically advanced, allowing us to extrude our sheets instead of using the traditional calendering process.
Our EPDM is manufactured thicker with a more uniform surface finish. This advancement in manufacturing cleaner sheets requires less preparation to ensure a stronger bond during installation.
Fasteners & Plates
All-Purpose Fasteners


All Purpose Fasteners are #14 case-hardened steel fasteners with a #3 Phillips head. The point is designed for quick installation in new or re-roof applications.
Use: Membranes and Insulation
Material: Case-hardened steel
Gauge: #14
Head: #3 Phillips head
Color: Grey
Deck Types: Wood, Concrete, and 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.
Plate Compatibility*
• UltraFast® Locking Plastic Plates
• UltraFast® Metal Plates
• High Load Plates (not pictured)
• APB Plates (not pictured)
• RhinoPlate (concrete decks)
* See corresponding data sheets for information regarding UltraFast, High Load, and APB Plates.

APB Plates - Membrane Fastening Plate

APB Plates are made of Galvalume®*-coated steel. The 2" (51 mm) round plate with barbs provides an even distribution of loads and eliminates sharp corners that can damage the insulation or membrane.
Use: EPDM Membranes
Material: Galvalume-Coated Steel
Plate: 2" (5.1 cm) round
Color: Grey
Deck Types: Wood, Concrete, and 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.
* Galvalume is a registered trademark of BIEC International, Inc. and some of its
licensed producers.
Fastener Compatibility
Designed to be used with Johns Manville All Purpose Fasteners and High Load Fasteners.
High Load AccuSeam System


The High Load AccuSeam System is a premier automated system for mechanically attached seams. The System positions the 23⁄8" (6.03 cm), round, High Load Plate with eye hooks, and installs the High Load Fastener, up to 6" (15.24 cm) in length in a one-step, continuous process. Standard High Load Plates are not compatible with the AccuSeam Fastener and Plate System.
Use: Membranes
Material: High Load Fastener - Case-hardened steel
High Load AccuSeam Plate - Galvalume®*-Coated Steel
Gauge: #15
Head: #3 Phillips head
Plate: 23⁄8" (6.03 cm) round
Color: Blue (fasteners), Grey (plates)
Deck Type: Wood or 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

High Load Fasteners (Pre-Assembled)

.jpg)
High Load Fasteners are #15 fasteners with a #3 Phillips head. The point is designed for quick installation in new and re-roof applications. High Load Fasteners are pre-assembled with FM Global® approved High Load Plates.
High Load Plates are 23⁄8" (6.03 cm) round, 20-gauge (0.9 mm) Galvalume®*-coated steel discs.
Use: Membranes
Material: High Load Fastener - Case-hardened steel
High Load Plate - Galvalume-Coated Steel
Gauge: #15
Head: #3 Phillips head
Plate: 23⁄8" (6.03 cm) round
Color: Blue (fasteners), Grey (plates)
Deck Type: Wood or 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

High Load Fasteners and Plates

.jpg)
High Load Plates are heavy duty, Galvalume®*-coated steel seam plates with eye hooks.
High Load Plus Plates are heavy duty, Galvalume-coated steel seam plates with barbs.
Use: Membranes
Material: Galvalume-Coated Steel
Gauge: 20-Gauge Steel
Size: High Load Plate - 2 3⁄8" (6.03 cm) round
High Load Plus Plate - 2 3/4” (6.99 cm) round
JM 90 Seam Plate - 3" (7.62 cm) round
Color: Grey (Galvalume-coated steel)

JM Purlin Fastener


The JM Purlin Fastener is a steel-coated fastener with a ¼" hex head and ¾" (19 mm) drill point. The drill point allows the fastener to be drilled through the purlin before the threads engage into the standing seam metal roof.
Use: Membranes
Material: Steel Coated Fasteners
Gauge: #12 Head: ¼" Hex Head
Plate: 23⁄8" (6.03 cm) round
Color: Grey
Deck Type: Structural Steel Purlins 12 - 18 gauge (2.77 mm - 1.25 mm) Metal.

JM Termination


Termination Bars are 1.34" (3.4 cm) wide, extruded, pre-punched aluminum strips.
Anchor Discs are 2" (5.1 cm) diameter, round, Galvalume®*-coated steel discs.
Masonry Nail-In Anchors are one-piece zinc anchors designed for fastening to concrete or masonry walls.
Use: Membranes
Materials:
High Load Fasteners - Corrosion-Resistant Steel
Zinc Nail-In Anchors - Zinc-Coated Steel
Anchor Discs - Galvalume
Termination Bars - Extruded Aluminum
Color: Various
Deck Types: High Load Fasteners - Wood and 18-24 Gauge Metal Zinc Nail-In Anchors - Concrete and Masonry
*Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.
Lite-Deck Fasteners and Plates


Lite-Deck Fasteners are available in lengths from 2 5/8” to 12" (67 mm to 305 mm), come with a square drive and offer coarse thread to provide high pullout resistance.
Lite-Deck plates are 3" (76 mm) round, Galvalume®*-coated plates for use with Lite-Deck Fasteners.
Use: Insulation
Fastener: Steel
Head: #3 Square Drive
Plate: 3" (76 mm) Galvalume-Coated Steel - Round
Color: Black (fasteners) Grey (plates)
Deck Type: Gypsum, and Cementitious Wood Fiber
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

Nail-Lok SD


Nail-Lok SD is utilized with steel decks in several panel applications including Nailboard, Vented Nailboard, structural insulated panels (SIP), and prefabricated wall panels. The extra-large star/spider head increases pull-through resistance and eliminates the need for plates or washers.
Use: Nailboard and Vented Nailboard Fastener.
Material: 10B21 steel with a corrosion-resistant coating.
Shank: 0.190” diameter Head: 0.625” diameter star/spider drive (free drive bits in each bucket).
Point: Spade
Color: Black Deck Types: 18-24 gauge steel
Structural Concrete (Predrilling is required with a pilot at least ½” deeper than fastener embedment. Pilot hole size varies, perform a pull-test to determine proper drill bit size).

Nail-Lok WD


Nail-Lok WD is utilized with wood decks in several panel applications including Nailboard, Vented Nailboard, structural insulated panels (SIP), and prefabricated wall panels. The extra-large star/spider head increases pull-through resistance and eliminates the need for plates or washers.
Use: Nailboard and Vented Nailboard Fastener.
Material: 10B21 steel with a corrosion-resistant coating.
Shank: 0.190” diameter
Head: 0.625” diameter star/spider drive (Free drive bits in each bucket).
Point: Gimlet
Color: Black Deck Type: Wood

Polymer Auger Fasteners


Polymer Auger Fasteners are glass-reinforced nylon fasteners with an internal ¼" (6 mm) square drive. Polymer Auger Fasteners have a 1" (2.5 cm) diameter head.
Polymer Auger Fasteners are available with Galvalume®*-coated, metal stress plates, designed to lock into the fastener head.
Use: Insulation and Membranes
Material: Fasteners - Polymer
Plates - Galvalume-Coated Steel
Gauge: 0.675" Diameter Screw
Head: 1" (2.5 cm) Diameter, ¼" (6 mm) Square Drive
Plates: 2" (5.1 cm) or 3" (7.6 cm) Round
Color: Black (fasteners), Grey (plates)
Deck Types: Cementitious Wood Fiber or Gypsum
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

Structural Concrete Deck Fasteners and Plates


Structural Concrete Deck Fasteners are diamond point, non-threaded fasteners for hammer-in installation of insulation and single ply membranes to structural concrete. These carbon steel fasteners have a corrosion-resistant coating.
Use: Insulation and Membranes
Material: Diamond Point, Corrosion-Resistant Coated Carbon Steel
Head: Flat
Color: Black
Deck Type: Structural Concrete
Plate Compatibility*
- UltraFast® Flat-Bottom, Metal Plates
- APB Plates
- High Load Plates
* See corresponding data sheets for information regarding UltraFast, APB and High Load Plates.

UltraFast AccuTrac Fastener and Plate System


The UltraFast AccuTrac Fastener and Plate System utilizes the standard UltraFast Fastener and the UltraFast Accutrac, recessed or flat bottomed, square plate. The AccuTrac tool positions the plate and installs fasteners 15⁄8" - 6" (4.13 cm - 15.24 cm) in a one-step process. Consistent vertical alignment of fasteners ensures maximum thread engagement and pullout performance.
Use: Membranes
Material: Fasteners - Case-Hardened Steel
Plates - Galvalume®*-Coated Steel
Gauge: #12
Head: #3 Phillips Head
Plate: UltraFast AccuTrac™ - 3" (7.62 cm) Square**
Color: Blue (fasteners), Grey (plates)
Deck Type: Wood or 18 - 24 gauge (1.25 mm - 0.51 mm) Metal.
*Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.
**Standard UltraFast Plates are not compatible with this system.

UltraFast Fasteners and Plates


The UltraFast Fastener is a #12, case-hardened steel, polymer-coated fastener with a buttress thread design that provides maximum pullout values and minimizes fastener backout. Available with either a #3
Phillips head or a ¼" (6.35 mm) hex head. The drill point is designed for quick installation in new or re-roof applications, and provides exceptional drilling capability in higher tensile decks.
Use: Insulation
Material: Fasteners - Case-Hardened Steel, Polymer-Coated
Gauge: #12
Head: #3 Phillips Head or ¼" (6.35 mm) Hex Head
Color: Blue
Deck Types: Wood or 18 - 24 gauge (1.25 mm - 0.51 mm) Metal
UltraFast Locking Plastic Plates are 3” (7.62 cm) round, high strength polypropylene plates with a special locking feature.
UltraFast Metal Plates are 3” (7.62 mm) round or square, premium Galvalume®*-coated steel metal plates.
Use: Insulation
Material: Plates - Galvalume-Coated Steel or High Strength Polypropylene
Gauge: 26 Gauge Steel
Plates: 3" (7.62 cm) Round Locking Plastic & Round or Square Metal
Colors: Grey (metal plates), Blue (plastic plates)
*Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

UltraFast Plus Plate


The UltraFast® Plus Plate is made of Galvalume®*-coated steel. The 3" (7.62 cm) nominal square plate is 0.010" (0.25 mm) thicker than the standard UltraFast square metal plate, providing a stiffer surface area to improve wind uplift performance of the system. The plate is used for fastening Invinsa® Roof Board to the roof deck in fully adhered single ply systems. The plate is designed to be used with UltraFast #12 or #14 fasteners.
Use: Cover Board
Material: Galvalume®-Coated Steel
Thickness: 0.028" (0.71 mm)
Plates: 3" (7.62 cm) nominal Square Metal
Colors: Grey (metal plates)
Deck Types: Wood or 18 - 22 gauge (1.25 mm - 0.76 mm) Metal
*Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

UltraFast Pre-Assembled Fasteners


The UltraFast Pre-Assembled Fastener is a #12, case-hardened steel, polymer-coated fastener with a buttress thread design that provides maximum pullout values and minimizes fastener backout.. Available with a #3 Phillips head or ¼" (6.35 mm) hex head (available by special order only). The drill point is designed for quick installation in new or re-roof applications, and provides exceptional drilling capability in higher tensile decks. The UltraFast Locking Plastic Plate prevents fastener pop-up.
Use: Insulation
Material: Fasteners - Case-Hardened Steel, Polymer-Coated
Plates - Galvalume®*-Coated Steel or Plastic
Gauge: #12
Head: #3 Phillips Head (¼" (6.35 mm) Hex Head is available by special order only)
Plates: 3" (7.62 cm) Round Locking Plastic or Round Metal
Colors: Blue (fasteners), Grey (metal plates), Blue (plastic plates)
Deck Types: Wood or 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.

UltraLok Locking Impact Fastener


UltraLok Locking Impact Fasteners and Plates consist of a preassembled Galvanized steel tube, a 2.7" (6.86 cm) Galvalume®*-coated steel disc, and a precision-formed, coated- steel, high tensile, wirelocking staple. The disc is securely clamped to the tube and is rib-reinforced to resist cupping.
Use: Cover Boards and Base Sheets
Material: Tube - Galvanized Steel
Plates - Galvalume-Coated Steel
Locking Staple - Coated-Steel, High Tensile Wire
Plate: 2.7" (6.86 cm) Metal - Round
Color: Grey
Deck Types: Poured Gypsum, Cementitious Wood Fiber and LWIC Lightweight Insulating Concrete
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers
