Spider Plus Blow-In - Canada

Easily filling gaps with no adhesive or netting, Johns Manville Spider® Plus blow-in insulation uses interlocking fibre technology to fill all gaps and voids quickly.

X

Data Sheet

SDS

Product Guide

Johns Manville Spider^® Plus Formaldehyde-free™ blow-in fibreglass insulation uses interlocking fibre technology to fill all gaps and voids quickly with no adhesive or netting for a faster installation. Spider Plus provides complete coverage, with no shrinking or settling, resulting in superior thermal performance and sound control. Designed for use in wood- and metal-frame construction, engineered- wood construction and manufactured homes.

Advantages

Fast Drying: Dries immediately once installed.
Thermally Efficient: Effective resistance to heat transfer.
Formaldehyde-free: Will not off-gas formaldehyde in the indoor environment.
Sound Control: Reduces sound transmission through exterior and interior walls, floor and ceiling assemblies.
Fire-Resistant: Flame Spread of 25 or less and Smoke Developed of 50 or less.
Resilient Inorganic Glass: No rotting, mildew or deterioration. Also noncorrosive to pipes, wiring and metal studs.

CCMC Evaluation Listing		13212-R
Standard for Mineral Fibre Thermal Insulation for Buildings	CAN/ULC-S702-09
Flame Spread	CAN/ULC-S102	≤ 25
Smoke Development	CAN/ULC-S102	≤50
Critical Radiant Flux	ASTM E970	Greater than 0.12 W/cmw², passing for exposed attic installation
Water Vapour Sorption	ASTM C1104	5% or less by weight
Odour Emission	ASTM C1304	Pass
Corrosiveness	ASTM 665	Pass
Fungi Resistance	ASTM G21, ASTM C1388	Pass
VOC Emission	ASTM D5116	Pass, EcoLogo
Thermal Transmission Properties	ASTM C518	Tested
Smoulder Resistance	CAN/ULC S129	Pass
Non-Combustable	CAN/ULC S114	Pass

JM Blow-In Video

JM Overview Video - Canada

JM Overview Video - Canada - French

Available Documents

Resources

Products

Spider Plus Blow-In - Canada