No-Burn Plus ThB

Filter Products By
  • Properties
  • Construction
  • Application Areas
Johns Manville has partnered with No-Burn, Inc. to offer No-Burn® Plus ThB. This tintable white, thin film intumescent coating can be applied over JM open- and closed-cell spray polyurethane foams.

Johns Manville has partnered with No-Burn, Inc. to offer No-Burn Plus ThB. This tintable white, thin film intumescent coating can be applied over JM open- and closed-cell polyurethane foams. When exposed to high temperatures and flame it intumesces, which creates a char-barrier to reduce heat transfer and surface burning in the event of a fire. This nontoxic, water-based coating complies with IRC and IBC and can serve in lieu of otherwise code-prescribed thermal barriers. 

No-Burn Plus ThB 6_88
Color Opaque/White/Tinted
Finish Flat
VOC Content 18 g/L EPA Method 24
Dry Time 60-90 minutes
Pails 5 gallons (19 L), 57.5 lbs.
Drums 55 gallons (208 L), 632.5 lbs.
Shelf Life 18 months
Cure Time 24 hours
Boiling Point 212°F 
Freezing Point 32°F 
% Volatile by Volume 33%
Specific Gravity 1.25 

Data Sheet

JM No-Burn Plus ThB Data Sheet

SDS

JM No-Burn Plus ThB White SDS
JM No-Burn Plus ThB SDS (ES)
JM No-Burn Black Tint SDS
JM No-Burn Black Tint SDS (ES)
No-Burn Plus ThB Custom Color Tint
No-Burn Plus ThB Custom Color Tint (ES)
No-Burn Plus ThB Gray
No-Burn Plus ThB Gray (ES)
No-Burn Plus ThB Dark Charcoal
No-Burn Plus ThB Dark Charcoal (ES)

Literature

TechConnect Sell Sheet

Evaluation Report

ER-305
TER 1905-03
JM Corbond III and Corbond IV IAPMO Report (ER 0146)

Certificates

Emission Test Certificate

Bulletins

Product Announcement

Available Documents