Spray Foam Insulation for the Home

The complete line of JM open- and closed-cell spray foam insulation solutions provide superior thermal and energy performance, as well as advanced air, moisture and sound control in any climate. These products can be used in interior and exterior walls, unvented and vented attics, floors, ceilings and crawl spaces. Plus, using spray foam can reduce air leaks and create a more comfortable, energy-efficient home – meaning you could see more energy savings every month.

All JM open- and closed-cell spray foam products:

  • Completely cover gaps and voids.
  • Work in hard-to-insulate areas.
  • Can outperform traditional insulation.

JM spray foam products are available exclusively to professionals. You can count on our network of contractors to get your spray foam installation done quickly and efficiently. If you are interested in getting spray foam installed in your home, visit our contractor locator to find an experienced  insulation contractor in your area.

Filter Products By
  • Project Type
  • Install Type
Jump To
High-yield, closed-cell spray foam with HFO technology. This allows JM Corbond IV to be produced with a low Global Warming Potential (GWP) and an Ozone Depletion Potential (ODP) of zero.

JM Corbond® IV closed-cell spray polyurethane foam (SPF) is a next generation HFO blown, two-component, Class 1 rated, medium-density, SPF insulation system. JM Corbond IV is designed to insulate commercial, residential, and industrial buildings. The HFO technology allows JM Corbond IV to be produced with a low Global Warming Potential (GWP) and with an Ozone Depletion Potential (ODP) of zero. Its high yield, superior thermal and moisture performance, and exceptional sprayability and adhesion make it an ideal choice for high-performing energy efficient buildings.

JM - BI - SPF - Corbond IV - 720x480
 Flame Spread  ASTM E84  ≤ 25
 Smoke Development  ASTM E84  ≤ 450
 Fungi Resistance  ASTM C1388  Pass
 Dimensional Stability  ASTM D2126  12% change in volume
 Core Density  ASTM D1622 2.0 lb/ft3
 Closed-Cell Content  ASTM D6226  > 90%
 Compressive Strength (1")  ASTM D1621  36 psi
 Water Absorption  ASTM D2842  0.88%
 Water Vapor Transmission  ASTM E96  0.61 perm at 1.5", 1.1 perm at 1"
 Air Permeance   ASTM E2178-03  0.00055 (L/s)/m at 75 Pa
 Sound Transmission  ASTM E90-90, ASTM E413-87  36 (STC)

DATA SHEET

JM Corbond IV Data Sheet

SDS

JM Corbond SDS - A
JM Corbond SDS - A (ES)
JM Corbond IV Closed-cell SDS - B
JM Corbond IV Closed-cell SDS - B (ES)

LITERATURE

Product Selector Guide
JM Corbond IV Guide
TechConnect Sell Sheet
Building Envelope Solutions

INSTALLATION INSTRUCTIONS

JM Corbond IV Installation Guide
SPF Processing Parameters
SPF Change-over Procedure
SPF Change-over Procedure (ES)
SPF Safety Warning Sign
SPF Health and Safety Sheet
Corbond Daily Work Log

EVALUATION REPORTS

Environmental Product Declaration Spray Polyurethane Foam Insulation (HFO) Report
JM Corbond IV IAPMO Report (ER 0146)
EPD for Spray Polyurethane Foam Insulation Closed Cell Using Hydrofluoroolefins (CCSPF, HFO)

CERTIFICATES

JM Corbond IV Greenguard
JM Corbond IV Greenguard Gold

Project Profile

Denny Way Project Profile

Available Documents

JM No Mix Open Cell (NMOC) Spray Polyurethane Foam (SPF) is a two-component, low-density insulation system. With its consistent yield, superior thermal insulation and excellent air sealing properties, it is specifically designed for insulating the interiors of commercial, residential and industrial ...

JM No Mix Open Cell (NMOC) Spray Polyurethane Foam (SPF) is a two-component, low-density insulation system. It is specifically designed for insulating the interiors of commercial, residential and industrial buildings, and does not require mixing. With its consistent yield, superior thermal insulation and excellent air sealing properties, JM NMOC is an ideal choice for creating high-performing, energy-efficient buildings. It also provides an effective air barrier and exceptional adhesion, making it a great choice for walls, floors, ceilings, crawlspaces, unvented and vented attics.

JM No Mix Open Cell Image
Drum Storage Temperature 50°– 90°F (10° – 32°C)
Hose Temperature 120° – 145°F (49° – 63°C)

Proportioner Pre Heat Temperature
A-side 120° – 145°F (49° – 63°C)
B-side 120° – 145°F (49° – 63°C)
Proportioner Pressure (Dynamic) 1100 – 1400 psi
Surface Temperature 45°– 95°F (7° – 35°C)

DATA SHEET
JM No Mix Open Cell (NMOC) Data Sheet
JM No Mix Open Cell (NMOC) Data Sheet (ES)

SDS
JM No Mix Open Cell (NMOC) Side B English
JM No Mix Open Cell (NMOC) Side B Spanish

JM No Mix Open Cell (NMOC) SDS Side A English
JM No Mix Open Cell (NMOC) SDS Side A Spanish

LITERATURE
JM No Mix Open Cell (NMOC) FAQ

INSTALLATION INSTRUCTIONS
JM No Mix Open Cell (NMOC) Install Guide
JM No Mix Open Cell (NMOC) Processing Parameters
JM No Mix Open Cell (NMOC) Processing Parameters (ES)

EVALUATION REPORTS
JM No Mix Open Cell (NMOC) Evaluation Report ER0971

Available Documents