Johns Manville Spider® Plus Formaldehyde-free™ blow-in fiberglass insulation uses interlocking fiber technology to fill all gaps and voids quickly with no adhesive or netting for a faster installation. Spider Plus provides complete coverage, with no shrinking or settling, resulting in superior thermal performance and sound control. Designed for use in wood- and metal-frame construction, engineered- wood construction and manufactured homes.
Fast Drying: Dries immediately once installed.
Complete Coverage: Effective in tight spaces, areas with large amounts of cross-bridging or small gaps and voids.
Thermally Efficient: Effective resistance to heat transfer, with R-values up to R-25 in a 6'' cavity.
Formaldehyde-free: Will not off-gas formaldehyde in the indoor environment.
Sound Control: Reduces sound transmission through exterior and interior walls, floor and ceiling assemblies.
Fire-Resistant: Flame Spread of 25 or less and Smoke Developed of 50 or less.
Resilient Inorganic Glass: No rotting, mildew or deterioration. Also noncorrosive to pipes, wiring and metal studs.
|ASTM Standards||ASTM C764||Type I|
|Flame Spread||ASTM E84||≤ 25|
|Smoke Development||ASTM E84||≤ 50|
|Critical Radiant Flux||ASTM E970||> 0.12 W/cm2 (0.11 Btu/ft2s)|
|Water Vapor Sorption||ASTM C1104||5% or less by weight|
|Odor Emission||ASTM C1304||Pass|
|Fungi Resistance||ASTM C1388||Pass|
|VOC Emissions||ASTM ES Section 011350||Pass|
|Combustion Characteristics||ASTM E136||Pass|
Spider Plus Consolidated Install Instructions
Spider Plus Consolidated Install Instructions (ES)
Spider Plus Full Install Instructions
Spider Plus Full Install Instructions (ES)
Product Selector Guide
Sleeper House Case Study