GoSet Thinset Mortar
- Product Descriptive Name
- Product Short Description
- GoSet is a multipurpose thinset for use in adhering tiles to GoBoard, GoBoard PRO, and GoBoard Membrane accessories in both horizontal and vertical interior applications.
GETTING STARTED
GoSet is a polymer-modified thinset mortar that is specifically designed for use with all GoBoard products in interior installations including porcelain, ceramic, granite, marble, thin porcelain tiles, large porcelain panels and dimensional stone tiles. GoSet can be used in both horizontal and vertical surfaces with all GoBoard products, properly prepared concrete and exterior grade plywood (interior). GoSet white formulation is approved for non-sag applications for tiles up to 12” x 24”. Follow applicable ANSI, NTCA and TCNA installation standards. Refer to www.jm.com/GoBoard for the most recent product information.
SURFACE PREPARATION
All surfaces must be structurally sound, clean, free of dust, dirt, oil grease, water, curing compounds, sealers, waxes or any contaminants that may inhibit proper bond. TCNA recommends roughening or scarifying glazed tile substrates. It is in the end user’s responsibility to determine the condtion and suitability of all surfaces before application.
FRAMING AND SUBFLOOR
All framing shall comply with local building code requirements and designed for a maximum allowable assembly deflection of L/360 (L/720) for stone) under all intended live loads. Maximum joist spacing for 5/8-in plywood and 3/4-in OSB is 16-in on-center when securely glued and fastened to joists. Clean and rough sand subfloor and fill any gaps with GoSet.
