Adhesives, Cleaners, and Primers

Built to withstand the test of time, our PVC was made to resist the toughest weather conditions and chemicals.

Our PVC is a flexible, thermoplastic membrane manufactured using an ultraviolet-resistant polyvinyl chloride. PVC membranes deliver a pliable and durable sheet with excellent weathering characteristics and resistance to harsh chemicals and industrial pollutants.

Filter Products By
  • Roofing Systems
  • Filter By
Jump To
Polyurethane adhesive for attaching insulation/cover boards to the roof deck or other insulation boards.

Use: JM One-Step Foamable Adhesive is a two-component polyurethane adhesive used for attaching insulation or cover boards to the roof deck or to other insulation boards.

Type: Two-part, cold application insulation adhesive.

Substrates: Compatible with the following insulations, cover boards, and substrates1 : polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete2
(Lightweight structural, poured-in-place structural, precast, and insulating); treated plywood (5/8" [1.58 cm] min. thickness); cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection).
1. Ensure that all insulation boards are 4' x 4' or smaller.
2. Drying time of 28 days required

Color: Part 1 - Tan, Part 2 - Colorless

Features: Solvent free. Set boards immediately into adhesive; reduces installation time and maximizes adhesive footprint. No hoses or pumps required. Always on ratio, eliminates guesswork.

JM-One-Step-Foamable-Adhesive 700x588

Installation Guides

Application Instructions for Board Stock Attachment with JM One-Step Foamable Adhesive

Available Documents

Liquid thermoplastic compound placed at the edge of PVC membrane seams.

Use: To seal edges of JM PVC membrane seams after the membrane has been welded to itself or to JM PVC-Coated Metal.

Type: One-part, membrane edge sealing agent.

Color: Clear

PVC Edge Sealer
Available Documents

Polymer-based adhesive for adhering smooth-backed PVC membranes to approved substrates.

Use: For adhering JM PVC membranes to approved substrates. Do not use on fleece-backed membranes.

Type: One-part, synthetic polymer-based membrane adhesive.

Substrates: Compatible with approved insulations and cover boards, wood substrates, concrete, and light-weight concrete decks.

Color: Amber

JM PVC Membrane Adhesive (Low VOC)
Available Documents

Polymeric adhesive designed for bonding PVC membranes to approved roofing substrates.

Use: For adhering JM PVC membranes to approved substrates. Limited availability from October 1st to April 15th. See Bulletin T13-007, dated May 23, 2013 for additional information.

Type: One-part, water based membrane adhesive.

Substrates: Compatible with approved insulations and cover boards, concrete, and light-weight concrete decks.

Color: White

JM PVC Membrane Adhesive Water BAsed

case studies

Case Study - The Preserve At Palm-Aire

considerations

Water-Based Application for Single Ply Cold Weather Considerations

Available Documents

Two-part polyurethane adhesive.

Use: JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive used for attaching fleece-backed single ply membranes to insulation boards or various deck types as well as insulation boards to the roof deck or to other insulation boards.

Type: Two-part, cold application insulation adhesive.

Substrates: Compatible with the following insulations, cover boards, and substrates1 : polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete2 (Lightweight structural, poured-in-place structural, precast, and insulating); treated plywood (5/8" [1.58 cm] min. thickness); cementitious wood fiber; gypsum; smooth or granulated BUR, APP or SBS.
1. Ensure that all insulation boards are 4' x 4' or smaller.
2. Drying time of 28 days required

Color: Part 1 - Tan, Part 2 - Colorless

Features: Solvent free, and HCFC or CFC free. Universal adhesive for adhering fleece-backed membranes and insulation boards. Sets in minutes.

JM-ROOFING-SYSTEM-URETHANE-ADHESIVE

installation guides

Installation Instructions for JM Roofing Systems Urethane Adhesive (RSUA)

Available Documents

This caulk is used to seal flashing terminations, peel and stick products, and exposed edges of JM membrane cement splices.

Use: To seal the edges around flashing terminations, peel and stick products and exposed edges of JM membrane cement splices.


Type: One-part, elastomeric sealant.


Colors: Black or White

JM Single Ply Caulk
Available Documents

Low-VOC solvent cleaner used to remove contaminants from TPO and PVC membranes.

Use: To remove dirt, asphalt or other contaminants from JM TPO and PVC single ply membranes to ensure a good weld or bond. Can be used prior to applying TPO Membrane Primer for peel and stick applications.

Type: One-part, low VOC solvent, membrane cleaning agent.

Color: Clear

JM-SINGLE-PLY-MEMBRANE-CLEANER-700x438
Available Documents

One-part mastic used to seal single ply membranes to terminations and other penetrations.

Use: To seal JM Single Ply membranes to terminations and other penetrations.

Type: One-part, butyl polymer-based water cutoff mastic.

Substrates: Compatible with wood, concrete, metal, plastic, and other substrates for water penetration prevention.

Color: Grey

JM-Single-Ply-Sealing-Mastic
Available Documents

A two-component polyurethane adhesive used for attaching fleece-backed membranes to insulation and insulation boards to the roof deck or to other insulation boards.

Use: For bonding fleece-backed singly ply, insulation and cover boards.

Type: Self-contained two-part, low-rise foam adhesive.

Substrates: Compatible with the following: insulations, cover boards, and substrates: fleece-backed TPO, fleece-backed PVC, polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete; treated plywood; cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection).

Color: Pink

JM Two-Part UIA Canisters

installation guides

JM Two-Part Urethane Insulation Adhesive Canister Installation Guide
 

 

 

Available Documents

JM One-Part Pourable Sealer is used as a penetration pocket filler.

Use: JM One-Part Pourable Sealer is used as a penetration pocket filler.

Type: One-part polyether sealant.

Color: Grey

One-Part-Pourable-Sealer-700x467

Brochures

Adhesives Migration Cheat Sheet

Installation Guides

One-part Pourable Sealer installation guide

Available Documents

One-part, acrylic reflective coating (in white or tan) for bituminous roof systems.

Use: As a reflective top coat over a variety of substrates, including smooth or mineral surfaced asphalt-based systems, single ply and metal roofing.

Type: One-part acrylic elastomeric roof coating.

Colors: White, Tan

Features: Asphalt bleed blocking. 100% acrylic durability. Energy savings. Prolonged roof life. Reduced life cycle costs.

TopGard-4000-700x530
Available Documents

One-part, acrylic reflective coating (in white or tan) for bituminous or EPDM roof systems.

Meets the requirements of ASTM D 6083

Use: As a reflective top coat over a variety of substrates, including smooth or mineral surfaced asphalt-based systems, single ply and metal roofs.

Type: One-part acrylic elastomeric roof coating.

Color: White, Tan

Features: 100% acrylic durability. Energy savings. Prolonged roof life. Reduced life cycle costs. Ideal for all climates, especially cold climates where temperatures may drop below 0F.

TopGard-5000-700x577

Case Studies

Solano County Government Center County Administration Building

Available Documents

One-part, acrylic base coating (for TopGard® 4000 or 5000) that acts as an oil-bleed barrier for bituminous systems.

Use: TopGard Base Coat is used over a variety of substrates, including smooth and mineral surfaced asphalt-based roofing systems and single ply. It provides outstanding bleed-blocking over hot asphalt, asphalt emulsion systems, and both modified and built-up roofing systems. TopGard Base Coat must be used as a base coat in concert with TopGard 4000 or TopGard 5000.

Type: One-part acrylic elastomeric base coating.

Color: Buff

Features: Can be used within 24 hours of roof membrane installation. Guaranteed to withstand ponding water up to 7 days when product is properly installed and cured. Prolonged roof life and reduced life cycle costs. Renewable.

TopGard-Base-Coat-700x549

Case Studies

Solano County Government Center County Administration Building

Available Documents