- glass nonwovens air-laid
- glass nonwovens wet-laid
- glass needle mat
- synthetic nonwovens spunbond
- synthetic nonwovens meltblown
Johns Manville offers various types of technologies for our nonwovens products. While all of these technologies service multiple applications, read below to see which technology fits your specific need.
Synthetic Nonwovens Spunbond
Johns Manville synthetic spunbond nonwovens are made by spinning continuous polyester fibers onto a moving belt. The continuous fibers come from polyester raw materail that has been dried, melted and extuded into a flowing polymer melt. After the spinning process, the polyester emerges as several thin, continuous filaments. These are cooled, stretched and solidified to consistent dimensions before being laid on the belt to form a mat.
Depending on your requirements, we have the ability to vary our bonding technologies. Our nonwovens can be bonded thermally, mechanically or chemically - each process resulting in highly differentiated characteristics.
Johns Manville has also released a new Synthetic Bico Spunbond.
Markets Served: Bituminous Roofing, Singly Ply Synthetic Roofing, Underslating, Insulation Facers, Carpet Tiles, Needled Flooring, Automotive Air, industrial, Pool & Spa, Liquid Filtration, Separator Nonwovens, Gauntlets and Pockets, Geotextiles
Synthetic Nonwovens Meltblown
Johns Manville's melt-blowing process creates fibrous webs directly from polymers using high-velocity air to attenuate the filaments. Due to differences in filament size, meltblown nonwoven fabrics differ in degree of softness, opacity and porosity.
Markets Served: HVAC, Food, Beverage, Pharmaceutical
Glass Nonwovens Wet-Laid
Johns Manville's nonwoven glass mats are tailored to meet your needs. We start by selecting the JM fiber glass that best suits your end-use application. With our large family of glass chemistries, we are able to blend inpolymer fibers or glass microfibers when fiber glass alone does not suffice. And depending on your requirements, we have a selection of formaldehyde-free, acrylic, urea formaldehyde and other resin binders. The finished mat can then be custom slit to a width and wound to a diameter that works with your manufacturing process and/or your end product.
Markets Served: Automotive Headliners, Bituminous Roofing, Carpet Tiles, Ceiling Tiles, Duct, GRP Laminates, Gypsum, Insulation Facers, Lead Pasting Nonwoven, Luxury Vinyl Tiles, Microfibers for Separators, Office Panel, Resilient Flooring, Roof Deck Facer, Separator Nonwovens, Shingles, Single Ply Sythetic Roofing Strands for Separators, Underslating, Windmill Blades
Glass Nonwovens Air-Laid
Utilizing a unique and sophisticed process, our glass microfibers are conveyed in a high-velocity air stream and formed into a nonwoven mat. The binder is spray applied and oven cured. This material can be manufactured with polyester spunbond or glass backing material. The resulting high-loft nonwoven material is mainly used in HVAC systems as a highly effective filtration media.
Markets Served: HVAC
Glass Needle Mat
Johns Manville's needle mat is manufactured by bonding glass fibers via mechanical needling. Due to its voluminous product structure, our needle mat is a great option for use as thermal insulation in canteen kitchen appliances, gas turbines and manufacturing facilities.
Our European-origin, white glass fiber needle mat is available in area weights from 300 to 4,600 g/sqm and its thickness ranges from 4.5 - 25.0 mm.
Markets Served: Needle Mat, Q-FIBERS BULK®