Resources
Products
Single Ply Commercial Roofing
Bituminous Commercial Roofing
Fasteners and Plates
Our APP is formulated with a premium-grade asphalt to enhance weatherability.
Combined with nonwoven polyester or glass fiber reinforcements, our APP systems exhibit tremendous strength and weatherability.
APP is tough and economical like a thermoplastic, with the proven waterproofing of asphalt.
Fasteners & Plates
All-Purpose Fasteners
All Purpose Fasteners are #14 case-hardened steel fasteners with a #3 Phillips head. The point is designed for quick installation in new or re-roof applications.
Use: Membranes and Insulation
Material: Case-hardened steel
Gauge: #14
Head: #3 Phillips head
Color: Grey
Deck Types: Wood, Concrete, and 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.
Plate Compatibility*
• UltraFast® Locking Plastic Plates
• UltraFast® Metal Plates
• High Load Plates (not pictured)
• APB Plates (not pictured)
• RhinoPlate (concrete decks)
* See corresponding data sheets for information regarding UltraFast, High Load, and APB Plates.
Lightweight Concrete (LWC) Base Sheet Fasteners
LWC Pre-Assembled Base Sheet Fasteners are twin-legged, expanding base sheet fasteners with 2.7" (6.9 cm) Galvalume®*- coated steel plates.
Use: Base Sheets
Fastener: Twin-Legged Steel
Plate: Galvalume-Coated Steel
Color: Black (fasteners), Grey (plates)
Deck Type: Lightweight insulating concrete roof decks, with minimum thickness of 1.25" (3.18 cm), and 1.25" (3.18 cm) for gypsum decks.
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.
Lite-Deck Fasteners and Plates
Lite-Deck Fasteners are available in lengths from 2 5/8” to 12" (67 mm to 305 mm), come with a square drive and offer coarse thread to provide high pullout resistance.
Lite-Deck plates are 3" (76 mm) round, Galvalume®*-coated plates for use with Lite-Deck Fasteners.
Use: Insulation
Fastener: Steel
Head: #3 Square Drive
Plate: 3" (76 mm) Galvalume-Coated Steel - Round
Color: Black (fasteners) Grey (plates)
Deck Type: Gypsum, and Cementitious Wood Fiber
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.
Polymer Auger Fasteners
Polymer Auger Fasteners are glass-reinforced nylon fasteners with an internal ¼" (6 mm) square drive. Polymer Auger Fasteners have a 1" (2.5 cm) diameter head.
Polymer Auger Fasteners are available with Galvalume®*-coated, metal stress plates, designed to lock into the fastener head.
Use: Insulation and Membranes
Material: Fasteners - Polymer
Plates - Galvalume-Coated Steel
Gauge: 0.675" Diameter Screw
Head: 1" (2.5 cm) Diameter, ¼" (6 mm) Square Drive
Plates: 2" (5.1 cm) or 3" (7.6 cm) Round
Color: Black (fasteners), Grey (plates)
Deck Types: Cementitious Wood Fiber or Gypsum
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.
Structural Concrete Deck Fasteners and Plates
Structural Concrete Deck Fasteners are diamond point, non-threaded fasteners for hammer-in installation of insulation and single ply membranes to structural concrete. These carbon steel fasteners have a corrosion-resistant coating.
Use: Insulation and Membranes
Material: Diamond Point, Corrosion-Resistant Coated Carbon Steel
Head: Flat
Color: Black
Deck Type: Structural Concrete
Plate Compatibility*
- UltraFast® Flat-Bottom, Metal Plates
- APB Plates
- High Load Plates
* See corresponding data sheets for information regarding UltraFast, APB and High Load Plates.
UltraFast AccuTrac Fastener and Plate System
The UltraFast AccuTrac Fastener and Plate System utilizes the standard UltraFast Fastener and the UltraFast Accutrac, recessed or flat bottomed, square plate. The AccuTrac tool positions the plate and installs fasteners 15⁄8" - 6" (4.13 cm - 15.24 cm) in a one-step process. Consistent vertical alignment of fasteners ensures maximum thread engagement and pullout performance.
Use: Membranes
Material: Fasteners - Case-Hardened Steel
Plates - Galvalume®*-Coated Steel
Gauge: #12
Head: #3 Phillips Head
Plate: UltraFast AccuTrac™ - 3" (7.62 cm) Square**
Color: Blue (fasteners), Grey (plates)
Deck Type: Wood or 18 - 24 gauge (1.25 mm - 0.51 mm) Metal.
*Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.
**Standard UltraFast Plates are not compatible with this system.
UltraFast Fasteners and Plates
The UltraFast Fastener is a #12, case-hardened steel, polymer-coated fastener with a buttress thread design that provides maximum pullout values and minimizes fastener backout. Available with either a #3
Phillips head or a ¼" (6.35 mm) hex head. The drill point is designed for quick installation in new or re-roof applications, and provides exceptional drilling capability in higher tensile decks.
Use: Insulation
Material: Fasteners - Case-Hardened Steel, Polymer-Coated
Gauge: #12
Head: #3 Phillips Head or ¼" (6.35 mm) Hex Head
Color: Blue
Deck Types: Wood or 18 - 24 gauge (1.25 mm - 0.51 mm) Metal
UltraFast Locking Plastic Plates are 3” (7.62 cm) round, high strength polypropylene plates with a special locking feature.
UltraFast Metal Plates are 3” (7.62 mm) round or square, premium Galvalume®*-coated steel metal plates.
Use: Insulation
Material: Plates - Galvalume-Coated Steel or High Strength Polypropylene
Gauge: 26 Gauge Steel
Plates: 3" (7.62 cm) Round Locking Plastic & Round or Square Metal
Colors: Grey (metal plates), Blue (plastic plates)
*Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.
UltraFast Pre-Assembled Fasteners
The UltraFast Pre-Assembled Fastener is a #12, case-hardened steel, polymer-coated fastener with a buttress thread design that provides maximum pullout values and minimizes fastener backout.. Available with a #3 Phillips head or ¼" (6.35 mm) hex head (available by special order only). The drill point is designed for quick installation in new or re-roof applications, and provides exceptional drilling capability in higher tensile decks. The UltraFast Locking Plastic Plate prevents fastener pop-up.
Use: Insulation
Material: Fasteners - Case-Hardened Steel, Polymer-Coated
Plates - Galvalume®*-Coated Steel or Plastic
Gauge: #12
Head: #3 Phillips Head (¼" (6.35 mm) Hex Head is available by special order only)
Plates: 3" (7.62 cm) Round Locking Plastic or Round Metal
Colors: Blue (fasteners), Grey (metal plates), Blue (plastic plates)
Deck Types: Wood or 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.
UltraLok Locking Impact Fastener
UltraLok Locking Impact Fasteners and Plates consist of a preassembled Galvanized steel tube, a 2.7" (6.86 cm) Galvalume®*-coated steel disc, and a precision-formed, coated- steel, high tensile, wirelocking staple. The disc is securely clamped to the tube and is rib-reinforced to resist cupping.
Use: Cover Boards and Base Sheets
Material: Tube - Galvanized Steel
Plates - Galvalume-Coated Steel
Locking Staple - Coated-Steel, High Tensile Wire
Plate: 2.7" (6.86 cm) Metal - Round
Color: Grey
Deck Types: Poured Gypsum, Cementitious Wood Fiber and LWIC Lightweight Insulating Concrete
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers
